Viper 5601 Installation Manual page 44

Security and remote start
Hide thumbs Also See for 5601:
Table of Contents

Advertisement

chirps that confirm the arming and disarming of the system, Arm/Disarm chirps
ON, w/Warn Away chirps OFF (2), Arm/disarm chirps OFF, w/ Warn Away
chirps ON (3), Arm/disarm chirps OFF, w/Warn Away chirps OFF (4).
1-4, 30 Second Siren Duration:
It is possible to program the unit to sound
for 30 or 60 seconds during the triggered sequence. Some states have laws
regulating how long a security system can sound.
When using the Bitwriter®, the siren can be programmed to sound for any
length of time from 1 second to 180 seconds.
1-5 Ignition Locks Off:
(1) When turned Off the system does not lock/unlock
the doors. (2) Lock and Unlock: The doors lock three seconds after the vehicles
doors are closed when the ignition is turned On, and unlock when the ignition
is turned Off. (3) Lock: Locks the doors three seconds after the ignition is turned
On and the vehicles doors are closed. 4) Unlock: Unlocks the doors when the
ignition is turned off.
1-6 Single Pulse Lock/Unlock(1):
The system sends out a single pulse when lock-
ing and unlocking. (2) Double-pulse unlock sends out 2 pulses when unlocking.
(3) Double-pulse lock sends out 2 pulses when locking. (4) Double-pulse lock/
unlock sends out 2 pulses when locking and unlocking.
1-7 0.8 sec. Door Lock Pulse (1)Duration:
The default setting is 0.8 second door
lock pulses. Some European vehicles, such as Mercedes-Benz and Audi, require
longer lock and unlock pulses to operate the vacuum pump. Programming the
system to provide 3.5 second (2) pulses, accommodates the door lock interface
in these vehicles. (See door lock connections section for wiring information re-
garding Type E door locks interfacing. The 0.4 second (3) pulse is required on
some vehicles where the lock wires can also control the windows and the 0.8
second pulse causes the windows to open/close when locking or unlocking.
1-8 No 2nd Unlock Output (1):
The second unlock output is defeated at all
times. 2nd unlock On with ignition control, after first unlock turns on the 2nd un-
lock output and unlocks the passengers doors after the driver's door is unlocked
with ignition controlled locks. (3) 2nd unlock on with ignition control with first
unlock turns on the 2nd unlock output and unlocks the passengers doors at the
same time the driver door is unlocked with ignition controlled locks.
44
© 2008 Directed Electronics. All rights reserved.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents