Decorative Tapering Stitches - Husqvarna Viking Sapphire 930 User Manual

Decorative Tapering Stitches

to form corners and points.
lid.
left and right arrow buttons to select beginning and/or end
your taper by using the arrow buttons.
Note: Its important to adjust your settings before starting to sew.
4. Place the fabric under the presser foot.
and at the end, the machine will sew the tapered point and
end tapering. When the tapering is completed the machine
stops automatically.
Note: In Programming, more than one stitch that can be tapered, you do
not need to press reverse to activate end tapering. The end taper will start
automatically after the last stitch in the program.
Tip: For a narrower stitch, adjust the stitch width.
Tip: To repeat a tapering stitch the same size, program the desired number
of stitches and then add tapering at the beginning and/or end.
Note: The Automatic Tapering Stitches 1:30 and 1:31 will automatically
taper the stitch. Follow step 4-5 to sew these stitches. To repeat the
Automatic Tapering stitch press the STOP button.
Basic sewing techniques
Decorative Tapering Stitches
Fabric:
Select: The fabric you are using
and the stitch you want to taper.
are marked with a blue color in the
Use:
recommended and the needle
recommended for your fabric.
3
49