KIT33879AEKEVBE. Click Open, and SPIGen will open a specifically configured SPI command generator for the KIT33879AEKEVBE. The configuration file will set all parameters for SPI signals from the PC and provide a list of commands that may be sent to the EVB.
GUI, and select Open, then browse the CD to find and select the SPIGen Configuration ".spi" file for the EVB you are using. Click Open, and SPIGen will open a specifically configured SPI command generator for your EVB. KIT33879AEKEVBE Evaluation Board, Rev. 1.0 Freescale Semiconductor...
Following are URLs where you can obtain information on other Freescale products and application solutions: Description Data Sheet www.freescale.com/files/analog/doc/data_sheet/MC33879.pdf Freescale’s Web Site www.freescale.com Freescale’s Analog Web Site www.freescale.com/analog Freescale’s Power Management Web Site www.freescale.com/powermanagement Freescale’s Automotive Applications Web Site www.freescale.com/automotive KIT33879AEKEVBE Evaluation Board, Rev. 1.0 Freescale Semiconductor...
Revision History 15 Revision History REVISION DATE DESCRIPTION OF CHANGES 11/2008 • Initial Release KIT33879AEKEVBE Evaluation Board, Rev. 1.0 Freescale Semiconductor...
Page 14
Freescale Semiconductor assume any liability arising out of the application or use of any Japan: product or circuit, and specifically disclaims any and all liability, including without Freescale Semiconductor Japan Ltd.
Need help?
Do you have a question about the KIT33879AEKEVBE and is the answer not in the manual?
Questions and answers