Supplied Hardware; Before You Begin The Installation - Optimus XL-50 User Manual

XL-50 Trunk-Mount Stereo Amplifier
(120-2013)

SUPPLIED HARDWARE

Your amplifier comes with the following items.
everything before you store or dispose of the packing materials.
Fuse 7.5A
Power Wire (Red) (1)
Ground Wire (Black) (1)
Remote Wire (Blue/White) (1)
4-Pin Connector with Wire (1)
Sheet Metal Screws (4)
Flat Washers (4)
Lock Washers (4)
Twist-On Terminal Connector (4)

BEFORE YOU BEGIN THE INSTALLATION

Before you install your amplifier, read all the instructions.
should be able to answer all of these questions about your vehicle's
electrical and autosound systems.
Does my vehicle have an autosound system, such as a car stereo or CD
player, already installed?
to use this amplifier.)
How do I connect a wire to the fuse box?
Which of the autosound system's wires is the power wire?
Which of the autosound system's terminals are low-level outputs and which
are high-level (speaker) outputs?
Also, be aware that installation in your vehicle might require cutting or
modifying your vehicle.
Choosing a Mounting Location
A good location for mounting the amplifier is in your vehicle's trunk.
Wherever you decide to mount it, choose a mounting location that:
Does not interfere with the vehicle's operation.
Preparation
(You must have an existing autosound system
Faxback Doc. # 40182
Be sure you locate
And you