Operating The Menus - Sony DSR-50P Operating Instructions Manual

Operating the Menus

Operating the Menus
Displaying the menu
Changing the menu settings
76
(GB) Chapter 6 Adjusting and Setting Through Menus
The unit allows you to set various parameters in the menus. Before you
start using the unit, set the internal clock in CLOCK SET on the OTHERS
menu. Except for clock setting, you can use all other factory-set default
parameters but change them as needed.
Note
If the internal backup battery is exhausted, the menu settings will be
initialized. The internal backup battery is fully charged if you connect the
power to the unit for about 10 hours. The menu settings will be kept for
about one month.
1
Set the DISPLAY (LCD OFF/OFF/ON) selector to ON.
2
Set the DISPLAY (MENU/TC/AUDIO) selector to MENU.
The menu is superimposed on the LCD monitor.
TC
CM
DISP
V
Icons
A
LCD
VTR
ETC
1
Rotating the SEL/PUSH EXEC dial, select the menu icon you want to
change, then press the dial.
2
Rotating the SEL/PUSH EXEC dial, select the submenu you want to
change, then press the dial.
3
Rotating the SEL/PUSH EXEC dial, change the setting.
4
Press the SEL/PUSH EXEC dial to return to the submenu.
5
Repeat steps 1 to 4, as needed.
To return to step 1
Rotating the SEL/PUSH EXEC dial, select
dial.
TC ⁄ UB SET
TC PRESET
UB PRESET
TC FORMAT
TC RUN
TC ⁄ UB IN
TC MAKE
UB TIME
JOG TC OUT
RETURN, then press the
Submenus