Sony DSR-50P Operating Instructions Manual page 51

2
Press the playback button on the player.
The player starts playback.
3
Press the PLAY button while pressing the REC button.
The unit starts recording and the index is marked.
To stop recording
Press the STOP button on the unit.
To pause recording
Press the PAUSE button on the unit.
To start recording using the DSRM-20 Remote Control Unit
(not supplied)
Press the PLAY button while pressing the REC button.
To record without inputting any video signals
Set the INPUT SELECT selector to other than DV, then set the COLOR
BAR (for DSR-50)/COLOUR BAR (for DSR-50P) on the DISPLAY SET
menu to ON. The color bars are recorded on the tape. The sound is
recorded according to the setting of the audio input selectors.
Notes
• The unit does not record any pictures unless the video signals are input
(except when inputting signals from the DV IN/OUT connector). If there
are no video signals or signals are interrupted during recording, the unit
pauses; if signals resume, the unit resumes recording.
• Do not change the INPUT SELECT selector setting during recording.
Otherwise, the recording image is distorted or the signal output from the
DV IN/OUT connector is interrupted.
Chapter 3 Playback and Recording
51
(GB)