Right Panel - Sony DSR-50P Operating Instructions Manual

Location and Function of Parts

Right Panel

2 PHONE LEVEL
control knob
1 PHONES jack
qa MONITOR
SELECT
selector
1 PHONES (headphones) jack (stereo phone jack)
Connects to the headphones. You can monitor the
audio signals being recorded or played through the
headphones. Select the audio signal you want to
monitor by selecting the channels with the MONITOR
SELECT selector qa.
Notes
• A warning tone is output on the headphone sound and
return sound to the camera. A warning tone is not
mixed on the signals output from the AUDIO
MONITOR OUT and AUDIO OUTPUT jacks.
• By setting the BEEP on the OTHERS menu to
MELODY, the selected melody beep sound is mixed
on the headphone sound and the return sound to the
camera when you operate the menu.
22
(GB) Chapter 1 Overview
3 TC IN/OUT connectors
4 DV IN/OUT connector
1Video signal input/output
section (see page 25 (GB))
8 REMOTE connector
9 CONTROL S connector
0 AUDIO MONITOR OUT jack
2Audio signal input/output section (see page 27 (GB))
7 CAMERA connector
2 PHONE LEVEL control knob
Adjusts the volume of the headphones that are
connected to the PHONES jack 1 and the audio level
of the return sound to the camera.
3 TC (time code) IN/OUT connectors (BNC-type)
Used to input or output the time code through these
connectors.
TC IN connector: Connects to the time code output
connector on the external devices such as a time
code generator or a VCR. This connector is used
to synchronize the internal time code generator of
this unit with an external time code.
Note
The unit can read the time code input to this
connector only when the time code is output at
normal play speed.
5 BREAKER button
6 DC IN 12V
connector