Table of Contents
Advertisement
1. Safety Instructions
1. Safety Instructions
IMPORTANT: Failure to understand and follow the instructions listed
below may result in electric shock, fire and/or serious personal injury.
1.1 Work Area Safety
•
Always perform automotive testing in a safe environment.
•
Keep your work area clean and well lit. Cluttered benches and dark areas
may cause accidents.
•
Keep clothing, hair, hands, tools, test equipment, etc. away from all
moving or hot engine parts.
•
Operate the tool in a well-ventilated work area.
•
DO nOT
presence of flammable liquids, gases, or heavy dust.
•
Keep a fire extinguisher suitable for gasoline/chemical/electrical fires
nearby.
•
DO nOT
tool.
•
DO nOT
•
Keep bystanders, children and visitors away while operating the tool.
•
Keep the tool dry, clean, free from oil, water and grease. Use a mild
detergent on a clean cloth to clean the outside of the tool when necessary.
1.2 Electrical Safety
•
Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators.
•
DO nOT
tool will increase the risk of electric shock.
•
DO nOT
or unplugging the tool. Keep cable away from heat, oil, sharp edges or
moving parts.
Page 2
operate the tool in explosive atmospheres, such as in the
use the tool around corrosive chemicals which can damage the
abuse the cable. Never use the cable to carry the tool.
expose the tool to rain or wet conditions. Water entering the
abuse the cable. Never use the cable for carrying, pulling,
Original Language Version
VS8196
Issue: 1 - 01/07/10
Advertisement
Table of Contents
