Table of Contents
Advertisement
Quick Links
thank you for purchasing a Sealey Heater. Manufactured to a high standard this product will, if used according to these
instructions and properly maintained, give you years of trouble free performance.
IMPORTANT: pLeAse reAd THese iNsTrUcTioNs cAreFULLY. NoTe THe sAFe operATioNAL
reQUireMeNTs, WArNiNGs ANd cAUTioNs. Use THis prodUcT correcTLY ANd WiTH cAre For THe
pUrpose For WHicH iT is iNTeNded. FAiLUre To do so MAY cAUse dAMAGe ANd/or persoNAL
iNJUrY ANd WiLL iNvALidATe THe WArrANTY. pLeAse Keep iNsTrUcTioNs sAFe For FUTUre Use.
8. Declaration of Conformity
Page 1
Table of Contents
...............................................................................2
......................................................................2
......................................................................... 2
...........................................................................3
................................................................................... 4
............................................................................... 4
........................................................................................................
...............................................................................
......................................................................... 9
............................................................................................
..................................................................... 12
.................................................................. 12
Original Language Version
InStructIonS for:
video bore scope
Model no. vs8196
...............................................................4
................................................................5
...............................................................6
...........................................................8
............................................... 9
..........................................................10
................................................................ 11
.................................................... 11
............................................................ 13
.......................................................... 14
...................................... 7
........................8
7
9
12
VS8196
Issue: 1 - 01/07/10
Advertisement
Table of Contents
Related Manuals for Sealey VS8196
Summary of Contents for Sealey VS8196
-
Page 1: Table Of Contents
InStructIonS for: video bore scope Model no. vs8196 thank you for purchasing a Sealey Heater. Manufactured to a high standard this product will, if used according to these instructions and properly maintained, give you years of trouble free performance. IMPORTANT: pLeAse reAd THese iNsTrUcTioNs cAreFULLY. NoTe THe sAFe operATioNAL reQUireMeNTs, WArNiNGs ANd cAUTioNs. -
Page 2: Safety Instructions
• DO nOT abuse the cable. Never use the cable for carrying, pulling, or unplugging the tool. Keep cable away from heat, oil, sharp edges or moving parts. Page 2 Original Language Version VS8196 Issue: 1 - 01/07/10... -
Page 3: Personal Safety
• DO nOT use the tool for personal or medical use in any way. • The product is not shock-resistant. Do not use it as a hammer or drop it. Page 3 Original Language Version VS8196 Issue: 1 - 01/07/10... -
Page 4: Description, Specifications
4 alkaline AA, 1.5 Volt batteries Cable reach (3’) -- expandable to 5m (16’) Imager head 8.5mm (0.22”) diameter Main unit: 32°F to 113°F (0°C to 45°C); Operating temp. Cable: 14°F to 176°F (-10°C to 80°C) Storage temp. -4°F to 158°F (-20°C to 70°C) Operating 5% to 95% non-condensing (display unit) humidity Page 4 Original Language Version VS8196 Issue: 1 - 01/07/10... -
Page 5: Accessories Included
3) Cable Connector – Connects the handheld display unit to the imager head and cable. 4) Power Indicator Light – Illuminates once the tool is turned on. 5) Video-Out Port – To connect to a TV / monitor. 6) Battery Compartment Cap – Remove to install or remove batteries. Page 5 Original Language Version VS8196 Issue: 1 - 01/07/10... -
Page 6: Buttons And Controls
C. Reverse Button - Controls the direction of the real-time image. D. DOWn Arrow LED Lighting Adjusting Button – Adjusts dim LED lighting. E. UP Arrow LED Lighting Adjusting Button – Adjusts bright LED lighting. Page 6 Original Language Version VS8196 Issue: 1 - 01/07/10... -
Page 7: Installation
To install new batteries, insert four (4) new AA batteries into the slots in the battery holder. 4) Battery orientation is indicated in the battery holder. 5) Replace the battery holder and compartment cap. Page 7 Original Language Version VS8196 Issue: 1 - 01/07/10... -
Page 8: The Imager Head And Cable Installation
The three accessories include magnet, hook and mirror (Fig.2). All are attached to the imager head in the same manner. Hold the imager head as shown in Fig.7, slip the end of the accessory over the flats of the imager head and then rotate the accessory 90° to fix as shown in Fig.8. Fig. 7 / 8 Page 8 Original Language Version VS8196 Issue: 1 - 01/07/10... -
Page 9: Video-Out Cable Connection
Press DOWn arrow button to dim LED, press UP arrow button to brighten LED. Press Reverse button to control the direction of the real-time image. The real-time image will do a horizontal reverse or vertical reverse. (Fig.9) Fig. 9 Page 9 Original Language Version VS8196 Issue: 1 - 01/07/10... -
Page 10: Operation Precautions
Protect against excessive heat. The tool should be kept away from heat sources such as radiators, stoves or others that produce heat. Store the tool in ventilated and dry places. Page 10 Original Language Version VS8196 Issue: 1 - 01/07/10... -
Page 11: Battery Precautions
Always handle the tool with care. It is not shock-resistant and should not be banged or dropped. Do not disassemble the tool beyond what is shown in the manual. Doing so will void your warranty. Page 11 Original Language Version VS8196 Issue: 1 - 01/07/10... -
Page 12: Troubleshooting
If you have any questions, please contact your local store, distributor or visit our website at www.sealey.co.uk. If it becomes necessary to return the tool for repair, contact your local distributor for more information. Page 12 Original Language Version VS8196 Issue: 1 - 01/07/10... -
Page 13: Environmental Protection
01284 757525 and leave your full name and address, including postcode. sole UK distributor, sealey Group, www.sealey.co.uk 01284 757500 Kempson Way, Suffolk Business Park, Bury St. edmunds, Suffolk, sales@sealey.co.uk 01284 703534 IP32 7Ar email Page 13 Original Language Version VS8196 Issue: 1 - 01/07/10...
Need help?
Do you have a question about the VS8196 and is the answer not in the manual?
Questions and answers