Nortel 1210 User Manual page 56

56 Using the Feature menu
2
3
4
Defining the key type
Follow this procedure to define the key type.
Each feature key can be defined in one of two ways: Central or Local.
A feature key defined as Central can have a Centrex feature, such as
Call Forward, assigned to it. A feature key defined as Local can have a
directory entry assigned to it. By default, all feature keys are defined as
Central.
For further information about Centrex features, see CICM
Fundamentals, (NN10044-111).
Step
1
2
3
4
5
6
On the terminal, select the key that you want to assign to a
different feature.
From the Feature menu, select and open Assign.
Press Ok, or press the send key.
The Assign menu appears.
Action
From the main menu, open the Feature menu.
A list of the feature keys and their current assignments appears.
Select a key to change.
The Feature submenu appears.
Select and open Assign.
If the key you selected in step 2 is assigned to a Centrex feature,
these soft key labels appear: Key Type and Autoscroll.
Press Key Type.
The Key Type screen appears. A check mark appears beside
the type currently assigned to the key.
Perform one of these actions:
•
To change Central to Local, select Local.
•
To change Local to Central, select Central.
Press Ok, or press the send key.
The key type is changed and a check mark appears beside the
selection.
IP Phone 1210
IP Phone 1210 User Guide — CICM
NN10300-902 01.01 23 July 2009
Copyright © 2006-2010 Nortel Networks. All Rights Reserved.
--End--