Displaying The Setup Page - Epson EasyMP EMP-735 Operation Manual

Setting, Monitoring and Controlling from a Computer

Displaying the Setup Page

Display the browser page for setup and control by either of the following
procedures.
Using the EMP NS Connection Tools
1
Connects a computer to the projector in Easy connect mode or Access
point mode.
"Connecting in Access Point Mode" in the EasyMP Setup Guide.
2
Click the "Projector Operation URL Display" icon in the EMP NS
Connection toolbar.
This starts the Web browser and displays the browser page for setup and
control.
Entering the IP Address of the Projector
When the projector's Network advanced settings have been set to "Access point
mode", the projector's IP address can be input by the following steps, and the
browser page for setup and control of the projector can be opened.
1
Start the Web browser on the computer.
2
Enter the IP address of the projector in the address input box of the Web
browser, and press the [Enter] key on the computer keyboard.
This displays the browser page for setup and control.
See "Connecting Using Easy Connect Mode" and
37
EasyMP Operation Guide
Projector
Setup
Projector
Control