Epson EasyMP EMP-735 Operation Manual page 40

Setting, Monitoring and Controlling from a Computer
Network setup items that can be set by the Web browser
The network setup items that can be set are as follows:
• Projector name
• Projector keyword
• ESSID
• Channel
• WEP encryption
• Format
• Key ID
• Encryption key
• DHCP
• IP address
• Subnet mask
• Gateway address
• SNMP trap IP address
• SNMP trap IP address 2
• MAC address
The content of the various items is the same as that of the Network advanced setting
screen of Network Screen.
"Connecting in Access Point Mode" in the EasyMP Setup Guide.
The WEP encryption setting from the Web browser can be keyed in not only in
hexadecimal, but also in text. The method for setting the WEP encryption by keying
in text differs depending on the access point. For this reason, please check with the
administrator of the network you are joining. Then, please first select "Text 1" as
the input "Format" before attempting to setup the WEP encryption. Try "TEXT2"
and "TEXT3" if "TEXT1" does not provide proper encoding.
If "128bit" is selected in "WEP encryption", you can only select "0" as the Key ID.
If "40bit" is selected, you can select either "0", "1", "2", or "3".
1
(display only, cannot be changed)
See "Connecting Using Easy Connect Mode" and
39
EasyMP Operation Guide