Sending A Scenario - Epson EasyMP EMP-735 Operation Manual

Creating and Sending a Scenario
6
After the scenario is complete, select "File" - "Save".
This saves the completed scenario.
To save under another scenario name, select "Save As", and enter the new
scenario name.
Tip :
• Upon saving, a folder with the same name as the scenario name and the "scenario
name.sit" file are created in the scenario folder. Each screen is converted to graphics
files and saved in the created folder according to the image quality settings.
• See Help for the functions of each of the menus in EMP SlideMaker2.
• Scenarios that have been directly stored onto a memory card cannot be played by the
EasyMP CardPlayer. After saving your scenarios, be sure to send scenarios to the
memory card by running "Send Scenario".

Sending a Scenario

To project a created scenario using the projector, it is necessary to save the scenario
to the memory card using the senario sending function in EMP SlideMaker2.
Designate a memory card inserted into the card drive of the computer as the send
destination.
It is also possible to set automatic projection and continuous projection of a
scenario at projector startup. The automatic projection function is called "autorun".
Tip :
• Scenario sending cannot be performed unless the created scenario is saved using
"Save" or "Save As".
• When sent to a memory card, the scenario file is saved in the memory card under the
name "scenario name.sit". In addition, a folder with the same name as the scenario is
created and each screen is converted to graphics files and saved according to the
image quality settings.
• Scenarios stored onto a memory card as a result of scenario sending cannot be opened
for correction or editing.
1
Insert the memory card into the computer.
Insert into a card adapter if a card adapter is needed.
EasyMP Operation Guide
10