CONNECTING ST1 BOARD AND CA2 BOARD (CON.) (REFER TO FIGURE4-33, 4-34)
Step5.
Fix the battery holder and LCD holder with a screw2x5(#100), whose screw hole is
located next to the removal lever for compact flash memory. (Refer to figure4-33)
Step6.
Solder a white cable for prevention of radiation which is left on the CA2 board, to
the top of F3102 on the front side of ST1 board. (Refer to figure4-34)
Rev. A
Chapter4 Disassembly and Assembly
PhotoPC 600
4-32