Page of 8

Motorola ITMC9S12XDP512 User Manual

Hide thumbs
   
_
V1.0
User's Guide
Motorola ITMC9S12XDP512 Evaluation Board
Ordering code
ITMC9S12XDP512
ITMC9S12XDP512 Evaluation Board
 iSYSTEM, May 2004
1/8

   Summary of Contents for Motorola ITMC9S12XDP512

  • Page 1

    V1.0 User’s Guide Motorola ITMC9S12XDP512 Evaluation Board Ordering code ITMC9S12XDP512 ITMC9S12XDP512 Evaluation Board  iSYSTEM, May 2004...

  • Page 2

    Features The ITMC9S12XDP512 is an evaluation and development board for Motorola MC9S12XDP512 microcontroller. iSYSTEM iC3000 emulator with the MC9S12X iCARD can be used for BDM debugging. Features • Motorola MC9S12XDP512 CPU (QFP144) • BDM debug connector • 8 MHz clock oscillator (16 MHz max.) •...

  • Page 3: Getting Started

    Getting started Setting up the board Please, verify the EVB before applying the power supply: • All jumpers (J1-J8) are set • CPU is inserted firmly in the socket • Oscillator is inserted Use with ic3000 BDM debugger • Insert the MC9S12X iCARD to iC3000 Active Emulator •...

  • Page 4

    ITMC9S12XDP512 Operation Power Supply The external power supply must provide the voltage between 6 and 12 V DC (typical 9 V DC). Maximum current consumption shouldn’t exceed 100 mA when 9 V DC is used. The polarity is not important. Low voltage DC plug must conform to the DIN 45323 standards: •...

  • Page 5

    Connectors BDM debug connector P4 BKGD N.C. RESET N.C. Expansion connectors P3, P5 and P6 AN16 AN17 AN18 AN19 AN20 AN21 AN22 AN23 AN10 AN11 AN12 AN13 AN14 AN15  iSYSTEM, May 2004...

  • Page 6

    Schematic  iSYSTEM, May 2004...

  • Page 7

    Notes:  iSYSTEM, May 2004...

  • Page 8

    Notes:  iSYSTEM, May 2004...

Comments to this Manuals

Symbols: 0
Latest comments: