12-2. MUCF-13NV-
OUTDOOR UNIT
OPERATING PROCEDURE
1. Removing the cabinet
(1) Remove the screws of the top panel.
(2) Remove the screws of the service panel.
(3) Remove the screws of the cabinet.
(4) Remove the screws of the front panel and motor support.
(5) Remove the service panel, and remove the screw from
the insides.
(6) Remove the top panel.
(7) Remove the cabinet.
Photo 3
Screws of the
service panel
2. Removing the electrical parts
(1) Remove the service panel and the cabinet.(Refer to 1)
(2) Remove the following parts.
•Compressor capacitor (C1)
•Outdoor fan capacitor (C2)
•Terminal block
E3
Screws of the
top panel
Photo 1
Screws
of the
cabinet
Photo 2
Service
panel
Photo 4
Compressor capacitor
30
PHOTOS
Screws of the front panel
and motor support
Screws of the cabinet
Screws of
the top panel
Screws of
the cabinet
Outdoor fan capacitor
Terminal block