Bang & Olufsen BeoVision 10 Manual page 43

Calibrate the speakers
Set up the speakers to optimise sound from your
listening position.
Calibrate the stand
Set the maximum angle the TV will turn – left and
right. The motorised movement of the TV will not
work until the calibration process has been
completed. You can only tilt the TV manually.
SPEAKER TYPES First-time setup of loudspeakers applies only to speakers for TV viewing.
See also 'Loudspeaker setup' on pp. 42–43 and 'Surround sound' on
SPEAKER DISTANCE
p. 20.
SPEAKER LEVEL
SOUND ADJUSTMENT Adjust volume, bass, treble and loudness and preset two default speaker
combinations. Select a different speaker combination at any time. See
pp. 20 and 24.
STAND ADJUSTMENT
At 'SET LEFTMOST
POSITION' turn left to the
point you wish to restrict
the movement to
Set preferred preset position for the TV to turn to, when it is switched
STAND POSITIONS
on and off. See p. 44.
At 'SET RIGHTMOST
POSITION' turn right to the
point you wish to restrict the
movement to
NOTE! You need to calibrate the stand before you
can use the motorised movement of the stand.
41
Accept