Bang & Olufsen BeoVision 10 Manual page 37

Register additional equipment
If not detected automatically by the TV, register
the equipment you have connected to the TV.
Repeat the procedure for each socket group.
'VGA'
' Y – Pb – Pr'
'HDMI'
the 'AV' menus is replaced with 'B1', 'B2', 'B3', and 'B4'.
Bring up 'TV
SETUP' menu
Contents of the
'CONNECTIONS'
Source options in
the 'AV1–AV4'
Equipment connected via VGA socket (AV3).
Equipment connected via Y – Pb – Pr socket (AV2 or AV3).
Equipment connected via an HDMI socket. If you have set the 'HDMI
EXPANDER' in the 'CONNECTIONS' menu to 'YES', the 'B' option in
Select sockets
Select
in a socket
'CONNECTIONS'
group and
menu
register
AV1–AV4
HDMI EXPANDER
menu
LINK TUNING
NONE
V.MEM
menus
DVD
DVD2
DTV2 (V.AUX)
DTV
V.AUX2
TV
PC
Select 'STANDBY Follow on-screen
OPTIONS' menu
instructions
Register connected equipment
Enable or disable an HDMI Expander connected
to the HDMI B socket
Set a link frequency and enable the system
modulator, see p. 14.
Nothing connected
Connected video recorder
Connected DVD player or recorder
Connected DVD player or recorder
Equipment, such as a set-top box
Equipment, such as a set-top box*
Equipment, such as a video game console
Equipment, such as a set-top box*
Connected PC or BeoMaster (only AV3)
The above are only examples of registrations; you
can register available equipment to any source
option. You may also have to register additional
equipment in the Master Link system.
1
*Only available if DVB tuner and TV tuner have
been disabled. See p. 26.
35
1
1