Bang & Olufsen BeoVision 10 Manual page 41

Y – Pb – Pr (AV2–3)
For video signals from an external source, e.g.
HDTV source. You can use the socket in
conjunction with an AV socket or a digital audio
socket.
SPDIF (1–2)
Digital audio input socket, e.g. DVD player.
PUC (1–4)
For IR control signals to external equipment
connected to an AV socket.
HDMI IN (A–B)
For High Definition Multimedia Interface video
source or PC. The sources can be registered to any
of the AV socket groups. Connect an HDMI
Expander to the HDMI B socket.
VGA (AV3)
For connection of a PC to receive analogue
graphics.
Headphones
RF OUT
Aerial output socket for distribution of video
signals to other rooms. Also requires an RF Link
Amplifier.
DVB
Aerial input socket for a digital TV signal.
MASTER LINK
For a compatible Bang & Olufsen audio or video
system.
POWER LINK (SUB)
Use for connection of a Bang & Olufsen
subwoofer.
POWER LINK (FRONT – REAR)
Use for connection of external loudspeakers in a
surround sound setup. See also pp. 42–43.
To mute speakers press the middle of the volume button. Press the
volume up or down to adjust volume in headphones. To restore
sound in speakers, press the middle of the volume button.
PCMCIA/SMARTCARD
For a card/module for access to digital satellite
channels.
STAND
For connection of a motorised stand.
AERIAL
Aerial input socket for an analogue TV signal, such
as an external aerial or cable TV network.
CAMERA (R, L, video)
For audio connection (right and left sound
channel respectively) and video signals from an
external source.
NOTE! Prolonged listening at high volume levels can
cause hearing damage!
39