Table of Contents
Advertisement
Appendix
Integral 33/55
Start-up
Approval and Conformity
We Tenovis GmbH & Co. KG declare that the products MM588, MM780,
and MM780 Ex T4 concur with the basic requirements and other relevant
provisions of guideline 1999/5/EC (R&TTE).
These units are designated for connecting to radio interfaces (DECTt) of
Tenovis PABX systems and fulfil the basic requirements in accordance with
the EU guideline 1999/5/EC (Radio and Telecommunication Terminal
Equipment, R&TTE).
These units are not designated for direct operation on interfaces of public
telecommunication networks.
In the event of any problems, please contact your dealer or Tenovis
Service.
The Declaration of Conformity can be requested on the following internet
address: www.tenovis.com/deutsch/verzeichnis/conformance.htm or search
in the index under the keyword: conformity.
This unit operates in accordance with DECTt system in the frequency
range of 1880 to 1900 MHz. The identification of this frequency range in the
frequency utilisation plan is applicable for a time period of 10 years and is
updated depending on European harmonisation.
Explosion-proof certification
The MM780 Ex T4 unit has been tested in compliance with the 94/9/EC
directive.
The unit complies with explosion-proof protection class Ex II 2G (EEx ib IIC
T4) and has been issued with EU type test certificate no. TÜV 00 ATEX
1637 X.
DECT is a registered trademark of ETSI
94
Advertisement
Table of Contents
