Table of Contents
Advertisement
Integral 33/55
Commissioning
HSG30-DECT Combined handset / headset
The HSG30-DECT combined handset / headset is available for the
handset. The connector socket is located on the base of the handset.
The combined handset / headset enables "handsfree" telephoning. The
microphone and loudspeaker in the handset will then be switched off.
The handset rings when a call arrives.
All other functions are unaffected. Use the volume buttons (see P. 62)
particularly for the handset volume.
Connecting the combined handset / headset
Place the handset on a table with the display
facing up.
MM780: Remove the rubber dust cap from the
opening in the base. Warning, imperviousness
to dust and water has now been reduced!
Hold the connector of the handset / headset so
that you can read the embossed text "TOP".
Insert the connector into the socket on the bottom of the handset.
Make sure that the clip clicks into place.
Disconnecting the handset / headset
Press in the lateral locking lugs.
Remove the connector of the handset / headset
from the handset.
The MM780 Ex T4 must not be operated with a headset. The rubber
dust cap is glued in and must not be removed.
Read the operating instructions for the HSG30 combined headset / hand-
set before using it.
Getting to know your handset
15
Advertisement
Table of Contents
