Integral 33/55
Commissioning
Vibra battery for MM588
A Vibra battery is available for the handset. The Vibra battery serves to
vibrate the handset when a call is received. How to activate the vibration
is explained on Page 59.
The vibrating device is permanently installed in the industrial handsets
MM780 / MM780 Ex T4.
Carrying clip for MM588
The clip is designed for carrying your handset in an office environment. It
will not stay attached to wide leather belts. To carry the handset outdoors,
please use the carrying case which can be obtained as an accessory.
Attaching the carrying clip to the
MM588
Place the handset on a table with the
display facing down. Attach the clip
to the handset from above. Make
sure that the clamping lugs click into
place.
Releasing the carrying clip from the MM588
To release the clip, bend the lateral clamps slightly apart.
When inserting a Vibra battery into the handset, it may occur that the
battery vibrates briefly. This is perfectly normal.
Getting to know your handset
13