Installation Options (Optional); Adjustable Feet - Panasonic PT-EX16KE Operating Instructions Manual

Installation options (optional)

You can install the projector on the ceiling using the optional ceiling mount bracket (Product No.: ET-PKE16H (for
high ceilings), ET-PKE16S (for low ceilings) and ET-PKE16B (for projector)).
z Use only ceiling mount brackets specified for this projector.
z For details on installation of the projector with the bracket, refer to the installation manual for the ceiling mount
bracket.
Attention
z To ensure the projector performance and security, installation of the ceiling mount bracket must be carried out
by your dealer or a qualified technician.

Adjustable feet

The adjustable feet can be extended by turning it as shown in the figure. It is retracted by turning it in the opposite
direction. This finely adjusts the height and tilt of the projected image.
When the adjustable feet is extended, the projector can be tilted to a maximum of 3°.
(The projection angle can be adjusted vertically.)
Attention
z Heated air is blowing out from the air exhaust port while the lamp is on. Do not touch the air exhaust port
directly when adjusting the adjustable feet.
z If the keystone effect occurs in the projected image, perform [Keystone] (
Note
z Do not extend the adjustable feet beyond the red line. Doing so may damage them.
z The vertical and horizontal position of the image can be adjusted using the lens shift function.
Setting up
page 57) from the [Screen] menu.

ENGLISH - 25