Image Adjust; Contrast; Brightness; Color - Panasonic PT-VX41EA Operating Instructions Manual

Image adjust

Image adjust
Select [Image adjust] from the Main Menu (see
"Navigating through the menu" on page 35),
then select the item from the sub-menu.
Remote Control
Note
Make sure you selected [Store] after adjusting
settings. Some settings can not be stored if not
registered with [Store] function.

Contrast

1 ) Press ▲▼ to select [Contrast].
2 ) Press the <SELECT> button to display
the adjustment dialog box.
3 ) Press ◄► to adjust the setting value.
Operation
Press ►. increase the contrast
decrease the
Press ◄.
contrast

Brightness

1 ) Press ▲▼ to select [Brightness].
2 ) Press the <SELECT> button to display
the adjustment dialog box.
3 ) Press ◄► to adjust the setting value.
Operation
increase the
Press ►.
brightness
decrease the
Press ◄.
brightness
44
- ENGLISH
Control Panel
Adjustment
Adjustment
range
Maximum
value 63
Minimum
value 0
Adjustment
Adjustment
range
Maximum
value 63
Minimum
value 0

Color

1 ) Press ▲▼ to select [Color].
2 ) Press the <SELECT> button to display
the adjustment dialog box.
3 ) Press ◄► to adjust the setting value.
Operation Adjustment
increase the
Press ►.
intensity of the color
decrease the
Press ◄.
intensity of the color
Note
When input video signal to the projector, [Color] will be
z
available.

Tint

1 ) Press ▲▼ to select [Tint].
2 ) Press the <SELECT> button to display
the adjustment dialog box.
3 ) Press ◄► to adjust the tint value to
get a proper color balance.
Adjustments can be made between
z
Note
When you select [NTSC] or [NTSC4.43] in System menu
z
under Video input signal, [Tint] will be available.

Color temp.

1 ) Press ▲▼ to select [Color temp.].
2 ) Press the <SELECT> button to display
the adjustment dialog box.
3 ) Press ◄► to select the desired Color
temp. level.
You can select the desired [Color temp.] from
z
[XLow], [Low], [Mid] or [High].
Note
[Color temp.] level displays [Blackbord] or [Colorboard]
z
when the [Blackboard(Green)] or [Colorboard] is selected
in the [Image select] menu.
Adjustment
range
Maximum
value 63
Minimum
value 0
0 and 63.