[Logo] - Panasonic PT-EX16KE Operating Instructions Manual

[Setting] menu

[Logo]

Sets logo selection and the PIN code for logo
selection.
1) Press ▲▼ to select [Logo].
2) Press the <SELECT> button.
■
z The sub menu 2 is displayed.
3) Press ▲▼ to switch the setting.
■ [Logo select] ■
1) Select [Logo select], and press the
<SELECT> button.
2) Press ▲▼ to switch the setting.
■
z The setting will change as follows each time
you press the button.
[Off]
[Off] Clears logo from screen.
Displays the image registered by the
[User]
*1
user.
Displays in the factory default
[Default]
settings.
*1: Available when the image is registered.
■
z "Logo Transfer Software" is required to register
the image.
■ [Logo PIN code lock] ■
Sets the system to make the setting and changing
of the "logo" only by the administrator.
1) Select [Logo PIN code lock], and press
the <SELECT> button.
■
z The PIN code input screen is displayed.
2) Press ▲▼◀▶ or the number (<0> -
<9>) buttons to enter your pin code.
3) Press ▲▼◀▶ to select [Set].
4) Press the <SELECT> button.
■
z If the PIN code is accepted, the projector
returns to the sub menu 2.
5) Press ▲▼ to switch the setting.
[Off]
The logo selection can be changed
[Off]
without the PIN code.
The PIN code is required to change
[On]
the logo selection.
66 - ENGLISH
[User] *1 [Default]
[On]
Note
z The entered PIN code is displayed with * mark on
the screen.
z The factory default setting for the logo PIN code is
"4321".
z To re-enter a number, press ◀▶ to select the digit
to re-enter, then use the ▲▼ or number (<0> -
<9>) buttons to re-select the number.
z Move the cursor to [Cancel] and press the
<SELECT> button to return to the sub menu 2.
z If [Logo PIN code] and the number are displayed in
red, an error has occurred. Re-enter the number.
■ [Logo PIN code change] ■
Changes the logo PIN code.
1) Select [Logo PIN code change], and
press the <SELECT> button.
■
z The PIN code input screen is displayed.
2) Press ▲▼◀▶ or the number (<0> -
<9>) buttons to enter your pin code.
3) Press ▲▼◀▶ to select [Set].
4) Press the <SELECT> button.
■
z If the PIN code is accepted, the new logo PIN
code is displayed on the screen.
5) Press ▲▼◀▶ or the number (<0> -
<9>) buttons to set your new PIN code.
6) Press the <SELECT> button.
7) Select [Yes], and press the <SELECT>
button.
■
z If the PIN code is accepted, the projector
returns to the sub menu 2.
Note
z To re-enter a number, press ◀▶ to select the digit
to re-enter, then press ▲▼ or the number (<0> -
<9>) buttons to re-select the number.
z Move the cursor to [Cancel] and press the
<SELECT> button to return to the sub menu 2.