Connections
Tying up the cables using cable ties
Keep the cables tidy by fixing the cables connected to the terminals into the cable holders on the projector body.
z The cable ties can be reused. (The tab can be loosened and released.)
■ Loosening the cable ties
■
(i)
1) Pull the tab in the direction of arrow (i).
2) Pull the tab in the direction of arrow (ii).
■
z The loop of the cable tie will widen.
Attention
z The following items are cautions when you use the cable tie.
–■Noises may occur for rare occasions.
–■Do not pull the cable forcibly. Doing so may cause disconnection.
–■It is recommended that you allow some slack when the cables are tied.
Caution
When connecting the projector to a computer or an external device, use the power cord supplied with the
device and commercially available shielded cables.
28 - ENGLISH
(ii)
Tab
Cable tie
Cable holders