Honeywell PRO 2000 Series Operating Manual page 5

This thermostat is ready to go!
Your new thermostat is pre-programmed and ready to go. All you have to do is set the
time and day. Then check the settings below and change if needed:
Set time and day (required for proper operation) ..............................See page 6
1.
Select system setting: Preset to Off ..................................To change, see page 7
2.
3. Select fan setting: Preset to Auto .....................................To change, see page 8
4. Program schedules: Preset to energy-saving levels
while you're at work or asleep ....................................To change, see pages 9-11
ONE-TOUCH TEMP CONTROL: You can override the program schedule at any time, and
manually adjust the temperature (see pages 12-13).
3
PRO 2000
69-2608EFS—03