Remote Control - iRobot 530 Owner's Manual

Remote Control

(optional accessory for selected models)
SPOT
Button
CLEAN/Power
Button
The Remote Control lets you conveniently control Roomba's functions.
You can use it to turn Roomba on and off and steer it around your
room without bending down. It also gives you remote access to these
commands:
. . .
Before using your remote for the first time, install 2 AA batteries (not
included).
TIP: Check that there is a direct line of sight from the Remote Control to
Roomba and that the remote is pointed at Roomba.
The Remote Control, Virtual Walls and Home Base operate using an invisible
infrared beam. If they are all used in the same area, Roomba may see
multiple infrared signals and will not operate. The Remote WILL NOT work
when Roomba is near Virtual Walls.
SPOT
CLEAN
. . .
For more detailed information, visit: www.irobot.com
Directional
Buttons
Roomba spirals approximately three
feet in diameter and then spirals back
to where it started, intensely cleaning a
local area.
Roomba automatically calculates the
room size and adjusts its cleaning time
appropriately.
Models 500-519 Roomba enters Spot
Models 520-599 Roomba attempts to
Models 600+
. . .
Button
mode.
dock on the Home
Base, if present.
Roomba enters Max
mode and cleans as
long as the battery
allows.
19