Remote Control - iRobot Roomba Owner's Manual

Remote Control

(optional accessory for all models)
The Remote Control lets you conveniently control Roomba's functions. You can use
it to turn Roomba on and off and steer it around your room without bending down.
It also gives you remote access to these commands:
Directional
Buttons
SPOT Button
CLEAN / Power Button
Dock Button
Before using your remote for the first time, install 2 AA batteries.
SPOT
CLEAN
Dock
Make sure there is a direct line of sight from the remote control to Roomba and
that the remote is pointed at Roomba.
The remote control, Virtual Wall, Lighthouse and Home Base operate using an
invisible infrared beam. If they are all used in the same area, Roomba may see
multiple infrared signals and will not operate. The remote WILL NOT work when
Roomba is near a Virtual Wall.
Roomba spirals approximately three feet (1 meter)
in diameter and then spirals back to where it started,
intensely cleaning a local area.
Roomba automatically calculates the room size and adjusts its
cleaning time appropriately.
Roomba attempts to dock on the Home Base, if present.
Roomba 800 Series Owner's Manual
EN
23