Permobil C500 Owner's Manual page 85

Owner´s Manual Permobil C500
3.7 Joystick Calibration Error
This occurs when the Joystick Calibration process has not been successful.
• Enter OBP and attempt calibration.
If the trip is still present after the above has been attempted, then the Joystick
Module may be defective. Refer to Section 5.
3.8 Latched Timeout
This occurs when the control system detects that the Latched Timeout pro-
grammed time has been exceeded. For example, the Input Device, (Joystick,
Head Aray, Sip and Puff, etc.) has not been operated frequently enough.
The trip is a notification of why the control system has dropped out of Latched
Mode.
• Cycle the power.
• Initiate Latched Mode.
If the trip is still present after the above checks have been made, then the Input
Device may be defective. Refer to Section 5.
3.9 Brake Lamp Short
This occurs when the control system detects a short in the Brake Lamp Circuit.
Refer to section 2.3 for connection details.
• Check the brake lamps, cables and connections to the control system.
3.10 Lamp Short
This occurs when the control system detects a short in either of the Lamp
Circuits.
7205 - Left Lamp Short.
7209 - Right Lamp Short.
• Check the lamps, cables and connections to the control system.
85
R-net Diagnostics