8. Software Upgrade Methord
1. This model requires 'dtv150_main.bin' binary file and USB memory for upgrade.
2. The upgrade file must be named dtv150_main.bin, and located in root directory in USB
memory.
3. Press S9 button in service remote controller, and check the decoder version.
4. And move to 'Dualboot Enable' and select 'On' by pressing '¢∏/¢∫' button.
5. Escape from service menu by pressing menu button.
6. Insert USB memory to USB slot on Side jack.
7. Turn off and on the TV set, then the TV set will be automatically upgraded.
A screen like the following will be shown on the screen.
8. Upgrade time is about 2 minutes and the TV set will automatically restart.
9. Press S9 button in service remote controller, and check the decoder version.
-42-