Basic Functions; Secure Voice Transmission; Answering A Call - Siemens OpenStage 40 SIP User Manual

Step by Step

Basic functions

Please read carefully the introductory chapter
"Getting to know your OpenStage phone"
page 14 before performing any of the steps
described here on your phone.

Secure voice transmission

Prerequisite: The secure voice communication option
must be activated by your administrator.
If you call a party or receive a call from a party over a se-
cure connection, a padlock icon
party's row on your graphic display. You can opt to have
voice connections that are no longer secure indicated
by a brief alerting tone and a window with the message
"Unencrypted call" (see

Answering a call

Your OpenStage phone rings with the tone signal set
when an incoming call is received. The call is also visu-
ally signaled on the call display.
If transmitted, calling party information (name, phone
number) appears on the graphic display.
If you have set a pattern melody or a ringtone file
page 165 on your phone, it is possible that
service personnel have preset a different pattern
melody, pattern sequence or ringtone or deacti-
vated the ringtone, depending on the call type
(e.g. an external or internal call).
An incoming call will interrupt any ongoing tele-
phone setting operations. When the call ends, you
can press the N key to return to the point in the
menu structure where you were interrupted.
1. Closed for secure or open for nonsecure voice communication
Basic functions
1
appears on the other
page 169).
39