Context-Dependent Displays - Siemens OpenStage 40 SIP User Manual

Context-dependent displays

Depending on the situation at hand, the graphic display on your OpenStage
phone displays different content, to which you can respond intuitively.
Information on actual events
The following icons appear centered on the display when your phone is idle
and signal current properties or events.
Example: You missed two calls in your absence.
02
You have two new voice messages that you can open by pressing O
page 34.
Icons for events
Icon Explanation
You received new voice messages.
New entries have been added to the call lists.
Local call forwarding is active.
Context menus
An arrow beside a selected entry indicates the existence of a context
menu that you can open by pressing the i or g buttons on the navigator
( page 20). The range of functions available is situation-specific.
Consultation
Hold
Blind transfer call
Disconnect
After a connection is set up – you are called or you make call – the context
menu appears automatically under the current connection for the config-
ured time (e.g. 20 seconds).
You can define how long the context menu should be displayed. You can
deactivate the automatic display so that the g key on the navigator must
be pressed to see the context menu of the connection
Getting to know your OpenStage phone
1st entry
(selected on callup)
Selected entry
page 173.
27