Using The Tv On/Off Sensor - Bose LIFESTYLE DVD Installation Manual

OPTIONAL CONNECTIONS AND ADDITIONS
Using the TV on/off sensor
•
":'0 '
eie : :
' • • • • • • • • . • . • • • • • • • • • . . • • • • . • . . • • • . • • • • • • • • • • . • • . • . • • • . • • . • • . • . • • • • • • . • • . • • . • . • . • • • . • • • • • . • • • • • • • • . • . . • • . . • • . . . • . . • • . • • . • • • . • . • • • • . • • • • • • • • • . • . • • • • • • • • . • • . • • . • • . • • • • . • • • • • • • . • • • . . • • . @ • . • • . • • • . • • • . • . . • . • • . . • . • • • • • • • . . . • • @ • • • • . . . • • • . • • . • • • • . • . . • • • • . • • • • • • . • . • • • • . • • • • • . • • • • • . • • • • . '
'.
'
:v::",:,,::,:t:::::;:':';::;S;',:::';:,;:::>f:,:,:;:;:,:::::',:11:
TV connection panel example
TV on/off
sensor
The TV on/off sensor works with the system to automatically turn on the TV, as needed, when
another video source (DVD, cable/satellite box, etc.) is selected. If you choose not to use the
sensor, you need to turn on your TV separately.
Note: For information on how to set the LIFESTYLE? remote to control your TV and work with the
sensor, refer to your Operating Guide.
When installing the sensor on large TVs, you may need the help of another person so you can
position the sensor while someone else watches the TV screen.
1. Plug the sensor cord connector into the TV Sensor connector on the media center.
If you are using a SCART adapter, plug the sensor directly into the pass-through
connector provided on the adapter (Figure 21 on page 30).
2. Temporarily position the TV on/off sensor on the back of your TV.
Note: 00 NOT attach the supplied mounting strip until you have tested and activated the
automatic feature as explained starting with Step 3.
TV on/off sensor installed
on your TV
Figure 19
Note:
Mount the sensor on the bottom rear of
a
projection
TV
chassis. Front projectors with
a
separate screen may not work with the sensor.
3. Turn on your TV to test the sensor and activate the feature.
4. Press the System button on the LIFESTYLE® system remote.
5. Press the right arrow key to highlight the Video tab. Press Enter.
6. Move the sensor around on the back of the TV and watch the TV Power Status line in
the onscreen display. Find a location for the sensor where the status changes from TV
not detected to TV ON.
7. At this location, attach one of the included mounting strips.
8. Attach the other mounting strip to the sensor and mount it to the TV.
9. Using the up/down arrow keys, highlight TV Power and press Enter.
10. If you want your TV to turn on automatically when you turn on your LIFESTYLE® system,
make no change (default is Automatic) and press Exit to leave the System menu.
If you used a SCART adapter for the TV connection, choose EURO and press Enter.
Press Exit to leave the System menu.
28