Selecting Pc Sources - Clarity SN-4215-P User Manual

3.2 Selecting the Source

3.2.1 Selecting PC Sources

PC and MAC and RGB sources come in a variety resolutions, and only one of them fits the screen's
16x9 aspect ratio exactly. For the others, you may choose how to expand the picture to fill the frame.
Most of the Selecting process can be automatic.
Selecting the PC source
1. Aim the remote control at the upper left
corner of the screen, and press
the remote control. This opens the Source
Select menu, which is divided into three
sections. You control the upper left part;
the other two sections only display infor-
mation.
2. Highlight the upper pair of arrows.
3. With the left-right arrow buttons on the
remote, choose either PC1 or PC2. On the
right side of the menu, you see the
choices, and a bullet (dot) shows what is
currently selected.
4. The electronics will now automatically
choose the correct Mode (in this case, res-
olution) to display the picture:
• 640x480 [VGA]
• 800x600 [SVGA]
• 832x624 [a MAC resolution]
• 852x480 [fits the screen exactly]
• 640x400 [Windows resolution during
3 - 10
on
SOURCE
5. Almost always, the automatic Mode De-
Setting the Format
Most computer resolutions are in 4x3 aspect
ratio and do not fit exactly into the 16x9 screen
of the SN-4215-P. You can choose what to do
when the computer picture doesn't fit as
explained in the next section (p. 3-12).
shutdown]
It will also choose the correct Scan (Pro-
gressive or Interlace) and the correct Sync
type (H & V on separate lines, Composite,
or Sync on Green) as well as several other
parameters.
tect feature does everything correctly the
first time. If it does not, and the picture is
broken or doesn't look right in some way,
use the up-down arrow buttons to high-
light Mode Detect and press .
ENTER