Clarity SN-4215-P User Manual page 83

Position
↑
← →
↓
Image
Viewport
† *
Color Balance
Wht
← → ← → ← → ← →
All
Red 031
Green 031
Blue 031
*
Curtain Select
[ ] Curtain On
Panel Hours: 2347
System Hours: 2534
Reset Panel Hours
[ ] Yes [ ] No
Was Panel Changed?
[ ] Yes [ ] No
The Group and Unit numbers are hexadecimal (0–F)
‡
ID
Group 0
Unit 0
Arrow buttons move image left / right / up / down. Dot shows whether the Image or
the Viewport will move. Toggle between Image and Viewport with ENTER button.
Wht (white) values 000–031; Gry (gray) values 000–007. Up-down arrows move
through both columns.
Gry
← → ← → ← → ← → Left-right arrows change all three values (brightness) of White or Gray Color
Balance
Left-right arrows change Red values of White or Gray Color Balance
007
Left-right arrows change Green values of White or Gray Color Balance
007
Left-right arrows change Blue values of White or Gray Color Balance
007
ENTER turns Curtain on and off. x means Curtain is on and no video will be
displayed.
Shows number of hours panel was on since last Panel Hours Reset
Shows number of hour system (electronics module) has been used
To reset Panel Hours, use left arrow to highlight
New menu (below) asks for confirmation.
To confirm Panel Hours reset, use left arrow to highlight
ENTER .
Shows Group ID hexadecimal number of this unit; can be changed with left-right
arrows.
Shows Unit ID hexadecimal number of this unit; can be changed with left-right
arrows.
, then press ENTER .
[ ] Yes
, the press
[ ] Yes
7 - 7