Clarity SN-4215-P User Manual page 82

Auto Detect (Open Source Select, then press Source button again.)
[ ] Auto Enable
[ ] Message Enable
← → ← → Noise Tolerance 000
← → ← →
Frequency Select
000
*
Phase Select
000
Input Level
Black Level
White Level
Black Level *(Go to this menu by pressing
(Requires Black field)
Auto [ ]
← → ← →
← → ← →
All
Level
Red 127
Green 126
Blue 131
White Level *(Go to this menu by pressing
(Requires White field)
Auto [ ]
← → ← → ← → ← →
All
Level
Red 127
Green 126
Blue 131
7 - 6
When checked (x), causes Mode Detect process to test the incoming signal
every second.
When checked (x), causes Mode Detect to display a message telling which
type of sync is currently being tested for.
When Mode Detect is Auto Enabled, it compares the incoming signal to what it
holds in memory. When these two differ by a significant amount for more than
the number of seconds shown in Noise Tolerance, Mode Detect reloads the
memory with the new values. Range: 0 15 seconds
*
Adjust the frequency of the internal dot clock, which should be made to match the
frequency of the computer source. Number shown does not directly correlate to
frequency. §
Adjust phase of the internal dot clock, which should be made to match the phase of
the computer source. Number shown does not directly correlate to phase. §
Opens
Black Level
Opens
White Level
Automatically adjusts the display's Black Level to the incoming video from the
PC or MAC. (Always use this option rather than adjusting this level manually.)
Raises or lowers all three (RGB) levels together
Level show the current (internal) setting of R, G, and B. §
Sample
Sample shows the levers (in bits) detected in the incoming signal; 000 is black,
001
255 is maximum white.
000
000
Automatically adjusts the display's Black Level to the incoming video from the
PC or MAC. (Always use this option rather than adjusting this level manually.)
Raises or lowers all three (RGB) levels together
Level show the current (internal) setting of R, G, and B. §
Sample
Sample shows the levers (in bits) detected in the incoming signal; 000 is black,
254
255 is maximum white.
255
255
menu
menu
INPUT
once.)
INPUT
once.)