Table of Contents
Advertisement
Clarity Visual Systems
Adjust the Black Input Level -
(This does not apply to Composite or S-Video sources – see Comp
Video/S-Video Level Adjustment on page 34.)
Source Select
Frequency
Phase
Input Level
Position
Zoom
Wall Processor
Color Balance
Curtain
Hours
Save Config
Recall Config
Reset Config
Misc Control
About
1. Display an all-black image
2. Press the remote control
3. Select Black Level
February 03
32
from the signal source
LEVEL button
PC, MAC or RGBS Data
Input Level
Black Level
White Level
Black Level
(Requires black field)
Auto
All
Red
Green
Blue
Examples of all-black sources are a black PC
Paint screen or frame 50882 on Reference
Recordings, "A Video Standard" test disk. Note:
It is not necessary for the entire screen to be
black. The area of interest is within 100 pixels of
the upper left corner of the Black Level menu.
The Input Level menu is displayed.
Press the Up/Down arrow keys to highlight Black
Level. Press the ENTER button to display the
Black Level menu.
[ ]
# $
Level
Sample
126
000
125
001
129
000
Advertisement
Table of Contents
