How To Preset Scales/Indications - Furuno RD-50 Operator's Manual

2. MENU
2.3

How to Preset Scales/Indications

You can preset the scales/indications for time, ship's speed, HDG (heading)/COG
(course over the ground) and wind speed/direction. You can change the scale/indica-
tion with the MODE key of the RD-501 (see section 2.16).
1. Press the MENU/ESC key to open the menu.
2. Press
3. Press
4. Press
indications, and press the ENT key.
2-6
or key to select [Scale Set Up] and press the ENT key.
Scale Set Up menu
or key to select [Mode] and press the ENT key.
Display options
or key to select [DISP1 (2, 3, 4 or 5)], for which you preset the scales/
DISP1 (2, 3, 4, 5) options