Basic Operation; Controls - Furuno RD-50 Operator's Manual

1.

BASIC OPERATION

1.1

Controls

Remote display RD-50
No.
1 PWR
2 DISP
3 DAY/NT
4 MENU/ESC
5 ENT
6 BRILL
2
1
PWR
Control
Turn on/off the power.
• Switch the screen.
• Return to the data screen during MENU display.
Switch the display between daytime use and nighttime use on
a "main" RD-50 (not available with "sub" RD-50).
Daytime: Black characters on white background.
Nighttime: White characters on black background.
• Open/close the menu.
• Cancel last entry in menu operation and return one layer.
• Go back one layer when you save the menu option in the un-
dermost layer.
• Go up one layer when you save the menu option.
• Long press to reset the trip distance when the [Trip DIST]
screen is displayed with [Internal] mode.
, • : Increase the display brilliance. Move the cursor upward
during MENU display.
• : Decrease the display brilliance. Move the cursor down-
ward during MENU display.
Note: Hold down
rapidly.
RD - 50
MENU
DISP
ESC
BRILL
DAY
ENT
NT
3 5
Description
or key to change the display brilliance
4
6
1-1