Specifying Audio Feedback Options; Calibrating The Display - Mitel 5360 User Manual

Specifying Audio Feedback Options

The Audio Feedback setting allows you to adjust the volume of the audio feedback as well as
the error beeps, and enable or disable the setting.
The error beep volume in the phone is related to the volume of the speaker. You can set the
beep volume using this procedure; however, adjusting the speaker volume also affects the beep
volume.
To adjust the volume of the audio feedback:
1.
2.
3.
4.
5.

Calibrating the Display

You can calibrate the touch display for optimum touch sensitivity.
To calibrate the phone screen for touch accuracy:
1.
2.
3.
4.
Mitel ® 5360 IP Phone User Guide – Issue 2, February 2011
Press (Applications).
Press Settings, and then press Audio Feedback.
Set the audio feedback options for the button beep and error beep.

To turn audio feedback on or off, press

To adjust the volume level, press

To play the beep, press Play button beep or Play error beep.
Press Save.
Press Close to exit the Applications menu.
Press (Applications).
Press Settings, and then press Calibrate Display.
Touch the center of each + to calibrate the display.
Press OK, and then press Close.
Personalizing Your Phone
or .
or .
Page 23