Call Forward-Follow-Me; Conference Call - Iwatsu ICON IX-5930 Series Quick Reference Manual

Activate a Forward Destination
• Press the Call FWD key.
• Select the key that corresponds to a pre-
programmed forwarding destination.
• The selected forward destination will flash when
activated.
• Press Exit to return to the main menu. The red
LED will light on the Call FWD key when
forwarding is active.
Forward Status / Forward Cancel
To check the Forward status of your phone or to
cancel station forwarding:
• Press the Call FWD key. The active selection will
be flashing and your status will appear on the top
two lines of the display.
• Press the corresponding key to Cancel call
forwarding.
• Press Exit to end the operation and return to the
main screen.
Call Forward—Follow-Me
Set Follow Me (From the destination extension)
• Press the Call FWD key.
• Select the Follow-Me key.
• Enter the number for the extension you are
forwarding from.
• Press Enter.
• Press Exit to end the operation.
Cancel Follow-Me (From the forwarded station)
• Press Call FWD.
• Select the flashing (active) entry.
• Press Exit to end the operation.

Conference Call

The Iwatsu Enterprise-CS allows you to make
conference calls with any combination of up to four
extensions and outside lines on the same call.
To Make a Conference Call:
While speaking on an outside or internal call:
• Press the Conference key (Conference will
flash).
• Make your next call (internal or outside call).
• When the party you are calling answers,
press the Conference key again.
or
• Press Park to park the call.
• Make your next call.
• Press Conference and then Park to complete the
conference.
• After you hear a tone burst, all parties are
connected.
To add another extension or outside line, repeat the
same procedure.
13