JVC KW-XR810 Instructions Manual page 32

Category Menu item
Day Color
Night Color
Menu Color
Ring Color *
Fad/Bal *
Fader/balance
Loud
Loudness
Volume
Adjust
Subwoofer
3
* Displayed only when USB Bluetooth adapter, KS-UBT1 is connected.
4
* If you are using a two-speaker system, set the fader level to <0>.
5
* This adjustment will not affect the subwoofer output.
32 ENGLISH
Selectable setting, [
• Button Zone
: For settings,
• Display Zone
: Changes the display and buttons (except for 0 /
• On
• Off : The display and buttons illuminate in the color that
3
• On : When a call comes in, the display will flash in blue.
• Off : Cancels.
: Fad (fader): Press 5 / ∞ to adjust the front and rear
4, 5
* R6 – F6, [ 0 ]
: Bal (balance): Press 4
L6 – R6, [ 0 ]
• Loud 1/2/3 : Boost low and high frequencies to produce a well-
• Off : Cancels.
Level –5 — : Preset the volume adjustment level of each source
Level +5,
[ Level 0 ]
• LPF
• Level
• Phase
Initial: Underlined
37.
DISP) illumination during menu, list search and
playback mode operations.
you have set.
• The display will change to the original color when
the call is answered or the incoming call stops.
When the unit receives a text message, the display
only illuminate in blue.
speaker output balance.
left and right speaker output balance.
balanced sound at a low volume level.
(except FM), compared to the FM volume level. The
volume level will automatically increase or decrease
when you change the source.
• Before making an adjustment, select the source
you want to adjust.
• "FIX" appears on the display if "FM" is selected as
the source.
: Turn the control dial to select the cutoff frequency
to the subwoofer.
Off: All signals are sent to the subwoofer.
LPF 55Hz/LPF 85Hz/LPF 120Hz: Frequencies
higher than 55 Hz/85 Hz/120 Hz are cut off.
: Turn the control dial to adjust the subwoofer
output level. Level 00 to Level 08 [ Level 04 ]
: Turn the control dial to select the subwoofer
phase. 0deg (normal) or 180deg (reverse)
]
/ ¢
to adjust the