JVC KW-XR810 Instructions Manual

JVC KW-XR810 Instructions Manual

Cd receiver
Hide thumbs Also See for KW-XR810:
Table of Contents

Advertisement

KW-XR810
CD RECEIVER / RECEPTOR CON CD /
RÉCEPTEUR CD
For canceling the display demonstration, see page 4. / Para cancelar la demostración en pantalla,
consulte la página 4. / Pour annuler la démonstration des affichages, référez-vous à la page 4.
For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l'installation et les raccordements, se référer au manuel séparé.
MANUEL D'INSTRUCTIONS
INSTRUCTIONS
MANUAL DE INSTRUCCIONES
ENGLISH
ESPAÑOL
FRANÇAIS
For customer Use:
Enter below the Model
No. and Serial No. which
are located on the top or
bottom of the cabinet.
Retain this information
for future reference.
Model No.
Serial No.
GET0661-001A
[J]

Advertisement

Chapters

Table of Contents
loading

Summary of Contents for JVC KW-XR810

  • Page 1 ENGLISH ESPAÑOL FRANÇAIS KW-XR810 CD RECEIVER / RECEPTOR CON CD / RÉCEPTEUR CD For canceling the display demonstration, see page 4. / Para cancelar la demostración en pantalla, consulte la página 4. / Pour annuler la démonstration des affichages, référez-vous à la page 4.
  • Page 2 – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not approved by JVC could void the user’s authority to operate the equipment. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2.
  • Page 3: How To Read This Manual

    Thank you for purchasing a JVC product. How to read this manual Please read all instructions carefully before The following icons/symbols are used to operation, to ensure your complete indicate: understanding and to obtain the best possible Press and hold the button(s) performance from the unit.
  • Page 4: Demonstration

    Canceling the display demonstration Turn on the power. Select <Off>. DEMO SET UP Finish the procedure. DEMO Clock [Hold] PRO EQ (Initial setting) Select <DEMO>. DEMO Setting the clock Turn on the power. Adjust the minute. Set Clock 1 : 00 AM SET UP DEMO Clock...
  • Page 5: Preparing The Remote Controller

    Preparing the remote controller (RM-RK50) When you use the remote controller for the first Warning (to prevent accidents and time, pull out the insulation sheet. damage): • Do not install any battery other than CR2025 or its equivalent. • Do not leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time.
  • Page 6: Basic Operations

    Basic operations Ejects the disc Loading slot Display window Selects preset station/channel. Control dial USB (Universal Serial Bus) input terminal Auxiliary input jack Remote sensor • DO NOT expose to bright sunlight. Changing the display information and pattern Ex.: When tuner is selected as the source Source operation display Audio level meter display •...
  • Page 7 When you press or hold the following button(s)... Remote Main unit General operation controller Turns on. • When the power is on, pressing /I/ATT on the remote controller also mutes the sound or pauses. Press /I/ATT again to cancel muting or resume playback. Turns off if pressed and held.
  • Page 8: Listening To The Radio

    Listening to the radio Ÿ ] “FM” or “AM” lights up when receiving an FM stereo broadcast with sufficient signal strength. Manual search Automatic presetting (FM)— “M” appears, then SSM (Strong-station Sequential Memory) press the button You can preset up to 18 stations for FM. repeatedly.
  • Page 9 Manual presetting (FM/AM) Title assignment You can preset up to 18 stations for FM and 6 You can assign titles up to 30 station stations for AM. frequencies (FM and AM) using 8 characters (maximum) for each title. Ex.: Storing FM station of 92.50 MHz into preset •...
  • Page 10: Listening To A Disc

    Listening to a disc Ÿ ] Turn on the power. All tracks will be played repeatedly until you change the source or eject the disc. Stopping playback and ejecting Selecting a folder/track on the the disc list “No Disc” appears. While listening to a disc..
  • Page 11 Selecting the playback modes For MP3/WMA disc, you can also use the search menu (A to Z, 0 to 9, and OTHERS) to scroll You can use only one of the following playback through the list menu. modes at a time. •...
  • Page 12: Listening To The Usb Device

    Listening to the USB device This unit is equipped with two USB input terminals (on the control panel and USB cable from the rear of the unit). You can use these two terminals at the same time. • You can also connect a USB Bluetooth Adapter, KS-UBT1 (supplied), ( 14) and/or an Apple iPod/iPhone ( 26) to the USB input terminal(s).
  • Page 13: Using Bluetooth Device

    You can operate the USB device in the same • You cannot connect a computer to the USB way you operate the files on a disc. input terminal of the unit. 10, 11) • Make sure all important data has been backed •...
  • Page 14: Pairing Device

    Refer also to the instructions supplied with the Bluetooth device. Preparation: • Connect the supplied USB Bluetooth Adapter (KS-UBT1) to one of the USB input terminals of the unit. • Operate the device to turn on its Bluetooth function. ] Turn on the power. Ÿ...
  • Page 15: Deleting Registered Device

    Hands-Free Audio Display result Call Streaming [Hold] Connect OK ‡ ‡ [Device Name] Handsfree OK ‡ — [Device Name] ] <Bluetooth> ] <New Pairing> Audio Stream OK ‡ — [Device Name] Connect Fail Try — — Reconnect ] Enter a PIN (Personal Identification The device remains registered even after you Number) code in to the unit.
  • Page 16: Using A Bluetooth Mobile Phone

    Connecting/disconnecting a • Received Calls * : Shows the list of registered device the received calls. Go to the following step. • Missed Calls * : Shows the list of the [Hold] missed calls. Go to the following step. • Phonebook * : Shows the name/ phone number of the phonebook registered in the unit or from the...
  • Page 17: Selecting Contact From Phonebook

    Selecting a contact from the phonebook ] Select the name/phone number you want to call. • When the sound is stopped or ] Enter “Call Menu” screen. interrupted during the use of a Bluetooth device, turn off, then turn on the unit. –...
  • Page 18: Receiving/Ending Phone Call

    • Only the existing characters will be shown on Switching the connected mobile phone the search menu. You can switch the current connected mobile • Press and hold 5/∞ to continuously change phone to the last connected mobile phone. the character of the search menu. •...
  • Page 19: Using A Bluetooth Audio Player

    Using a Bluetooth audio player Operations and display indications differ depending on their availability on the connected device. ] Select “BT FRONT” or “BT REAR.” • If playback does not start automatically, operate the Bluetooth audio player to start playback. Selecting the playback modes Starts or resumes •...
  • Page 20: Changing The Bluetooth Settings

    Changing the Bluetooth settings [Hold] ] Select a setting item, then repeat the procedure to change the setting accordingly. ] <Bluetooth> ] <Setting> • To return to the previous menu, press BACK. • To exit from the menu, press DISP or MENU. Setting item Selectable setting, [ Initial: Underlined...
  • Page 21 Reset the unit and try the operation again. If “Please Reset...” appears again, consult your nearest JVC car audio dealers. Bluetooth Information: If you wish to receive more information about Bluetooth, visit the following JVC web site: <http://www.jvc.co.jp/english/car/> (English website only) ENGLISH...
  • Page 22: Listening To The Hd Radio

    Listening to the HD Radio ™ Broadcast Before operating, connect HD Radio tuner box, KT-HD300 (not supplied) to the expansion port on the rear of the unit. • For details, refer also to the instructions supplied with the HD Radio tuner box. What is HD Radio Technology? HD Radio Technology can deliver high-quality digital sound—AM digital will have FM-like quality (in stereo) and FM digital will have CD-like quality—with static-free and clear reception.
  • Page 23: Listening To The Satellite Radio

    • SC-C1 and KS-SRA100 • PnP, SC-VDOC1 and KS-SRA100 For listening to an XM Satellite radio: • JVC Smart Digital Adapter (XMDJVC100) • CNP2000UC and CNPJVC1 • For details, refer also to the instructions supplied with the other components. GCI (Global Control Information) update •...
  • Page 24 ] Select a channel to listen. ] “SIRIUS” or “XM” Holding the button changes the channels Ÿ rapidly. While searching, invalid and unsubscribed channels are skipped. XM: If you do not select a channel within 15 seconds, category selected in step Ÿ ] Select a category.
  • Page 25: Storing Channels In Memory

    Checking the satellite radio ID Selecting preset station/category/ While selecting “SIRIUS” or “XM”... channel on the list ] Select “Channel 0.” ] Shows the “List” screen. SIRIUS: SIRIUS identification number is displayed after “Channel 0” is selected. XM: The display alternately shows “RADIO ID” and the 8-digit (alphanumeric) ID number.
  • Page 26: Listening To The Ipod/Iphone

    Listening to the iPod/iPhone You can connect the iPod/iPhone using the USB 2.0 cable (accessory of the iPod/iPhone) to the USB input terminal on the control panel or USB cable from the rear of the unit. There are three control terminals: •...
  • Page 27 Caution: Selecting a track from the menu • Some of the applications in the connected The following is not applicable in <iPod Mode> iPod/iPhone may not work correctly with this and <External Mode>. unit. • Avoid using the iPod/iPhone if it might hinder your safety while driving.
  • Page 28 The following is not applicable in <iPod Mode> When operating an iPod, some operations and <External Mode>. may not be performed correctly or as intended. In this case, visit the following JVC web site: <http://www.jvc.co.jp/english/car/> (English website only). ] “Repeat” or “Random”...
  • Page 29 Listening to the other external components You can connect an external component to: • EXT IN: Expansion port on the rear of this unit using the following adapters (not supplied): – KS-U57, Line Input Adapter – KS-U58, AUX Input Adapter Preparation: Make sure <Show>...
  • Page 30: Selecting A Preset Sound Mode

    Selecting a preset sound mode You can select a preset sound mode suitable Storing your own sound mode for the music genre. You can store your own adjustments in memory. FLAT = NATURAL = DYNAMIC = VOCAL [Hold] = BASS = USER = (back to the beginning) While listening, you can adjust the tone level of the selected sound mode.
  • Page 31: Menu Operations

    Menu operations Repeat step 2 if necessary. • To return to the previous menu, [Hold] press BACK. • To exit from the menu, press DISP or MENU. Category Menu item Selectable setting, [ Initial: Underlined DEMO • On : Display demonstration will be activated Display demonstration automatically if no operation is done for about 20 seconds.
  • Page 32 Category Menu item Selectable setting, [ Initial: Underlined Day Color • Button Zone : For settings, • Display Zone Night Color : Changes the display and buttons (except for 0 / Menu Color • On DISP) illumination during menu, list search and playback mode operations.
  • Page 33 Category Menu item Selectable setting, [ Initial: Underlined Select the cutoff frequency to the front/rear speakers. Set this to High Pass match the LPF settings. Filter • 62Hz/95Hz/ : Frequencies lower than 62 Hz/95 Hz/135 Hz are cut 135Hz off. •...
  • Page 34 Category Menu item Selectable setting, [ Initial: Underlined Contrast Level 01 — : Adjust the display contrast to make the Level 08 display indications clear and legible. [ Level 05 ] : For Bluetooth operations, 15, 16. : For Bluetooth settings, 20, 21.
  • Page 35 Category Menu item Selectable setting, [ Initial: Underlined Stereo/Mono * • Stereo : Restore the stereo effect. • Mono : Activate monaural mode to improve FM reception, but stereo effect will be lost. ( Ext Input * • Show : Enable “EXT IN” in source selection. •...
  • Page 36: Selecting The Variable Buttons And

    Selecting the variable buttons and display color illumination You can select your preferred color for buttons illumination (except for 0 / DISP) and display color seperately. Display zone Button zone All zone Repeat steps 2 and 3 to select a different zone and your preferred color.
  • Page 37: Creating Your Own Day And Night

    Creating your own day and night colors—User You can create your own colors for <Day Color> and <Night Color> to apply to button zone and display zone. • <Day Color> Displayed when <Dimmer> is set to <Off>. ( • <Night Color> Displayed when <Dimmer>...
  • Page 38: More About This Unit

    Setting the time for dimmer You can set the start/end time for dimmer. [Hold] ] Adjust the dimmer start time. ] <Display> ] <Dimmer> ] <Time Set> ] Adjust the dimmer end time. ] Exit from the setting. More about this unit Basic operations Tuner operations General...
  • Page 39 Disc/USB operations • Some CD-Rs or CD-RWs may not play back on this unit because of their disc characteristics, Caution for DualDisc playback or for the following reasons: • The Non-DVD side of a “DualDisc” does not – Discs are dirty or scratched. comply with the “Compact Disc Digital Audio”...
  • Page 40 • The maximum number of characters for file/ • When connecting a USB mass storage class folder names is 25 characters (including device, refer also to its instructions. <.mp3>, <.wma>); 128 characters for MP3/ • This unit may not work properly with some WMA Tag.
  • Page 41 • Do not use a USB device with 2 or more Icons for phone types: partitions. These icons indicate These icons indicate • When connecting with a USB cable, use the the phone type of the type of connected USB 2.0 cable. number entries in phone/audio devices •...
  • Page 42 <Dimmer> setting. • “Works with iPhone” means that an electronic accessory has been designed to JVC bears no responsibility for any loss of data connect specifically to iPhone and has been in an iPod/iPhone and/or USB mass storage certified by the developer to meet Apple class device while using this System.
  • Page 43: Maintenance

    Maintenance Moisture condensation To play new discs Moisture may condense on the lens inside the New discs may have some unit in the following cases: rough spots around the inner • After starting the heater in the car. and outer edges. If such a disc •...
  • Page 44: Troubleshooting

    Troubleshooting Symptom Remedy/Cause Sound cannot be heard from the • Adjust the volume to the optimum level. speakers. • Make sure the unit is not muted/paused ( • Check the cords and connections. The unit does not work at all. Reset the unit.
  • Page 45 Symptom Remedy/Cause Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in a format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. • Add the extension code <.mp3> or <.wma> to the file names.
  • Page 46 Symptom Remedy/Cause Noise is generated. The track played back is not an MP3/WMA/WAV track. Skip to another file. (Do not add the extension code <.mp3>, <.wma>, or <.wav> to non-MP3/WMA/WAV tracks.) “Reading” keeps flashing on the • Readout time varies depending on the USB device. display.
  • Page 47 Symptom Remedy/Cause The unit does not detect the • Search from the Bluetooth device again. Bluetooth device. • Reset the unit ( 3), then search from the Bluetooth device again. The unit does not make pairing Enter the same PIN code for both the unit and target with the Bluetooth device.
  • Page 48 Symptom Remedy/Cause Sound quality changes when receiving Fix the reception mode either to <Digital> or HD Radio stations. <Analog>. ( No sound can be heard. • <Analog> is selected when receiving all digital broadcast of HD Radio station. Select <Digital> or <Auto>.
  • Page 49 Symptom Remedy/Cause “Loading” appears on the display while The unit is loading the channel information and listening to the XM Satellite radio. audio. Text information are temporarily unavailable. • “Reset 08” appears on the display. Reconnect the unit and the satellite radio •...
  • Page 50: Specifications

    Specifications Power Output: 20 W RMS × 4 Channels at 4 Ω and ≤ 1% THD+N Signal-to-Noise Ratio: 80 dBA (reference: 1 W into 4 Ω) Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range: Bass: ±12 dB (50 Hz, 100 Hz, 200 Hz) Q0.7, Q1.0, Q1.4, Q2.0 Middle:...
  • Page 51 Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz Dynamic Range: 96 dB Signal-to-Noise Ratio: 98 dB Wow and Flutter: Less than measurable limit MP3 Decoding Format: (MPEG1/2 Audio Layer 3) Max.
  • Page 52 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! EN, SP, FR © 2010 Victor Company of Japan, Limited 0210DTSMDTJEIN...
  • Page 53 JVC car audio dealer or a company supplying kits. instalación, consulte con su concesionario de JVC de equipos de audio votre revendeur d’autoradios JVC ou une compagnie d’approvisionnement. para automóviles o a una compañía que suministra tales herramientas.
  • Page 54 Connecting a subwoofer (through a JVC amplifier) / Conexión de un subwoofer (a través de un amplificador JVC) / Connexion d’un caisson de grave (à travers un amplificateur JVC)
  • Page 55 JVC adapters or system to siguientes componentes al puerto de expansión, a través de los diversos suivants à l’aide de divers adaptateur JVC ou système au port d’extension. the expansion port. adaptadores o sistema JVC.
  • Page 56 The countries where you may use the Country Country Country Bluetooth® function Andorra Ísland Türkiye Italia Die Länder, in denen Sie die Bluetooth® Funktion verwenden können 台湾 Pays où vous pouvez utiliser la fonction Bluetooth® 대한민국 United States of America Australia De landen waar u de Bluetooth®-functie mag gebruiken Lichtenstein...
  • Page 57 ENGLISH FRANÇAIS KW-XR811 CD RECEIVER / RÉCEPTEUR CD For canceling the display demonstration, see page 4. / Pour annuler la démonstration des affichages, référez-vous à la page 4. For installation and connections, refer to the separate manual. / Pour l’installation et les raccordements, se référer au manuel séparé.
  • Page 58 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.
  • Page 59: Table Of Contents

    How to read this manual CONTENTS The following icons/symbols are used to How to read this manual indicate: How to reset your unit Press and hold the button(s) How to forcibly eject a disc [Hold] until the desired operation Canceling the display begins.
  • Page 60 Canceling the display demonstration Turn on the power. Select <Off>. DEMO SET UP Finish the procedure. DEMO Clock [Hold] PRO EQ (Initial setting) Select <DEMO>. DEMO Setting the clock Turn on the power. Adjust the minute. Set Clock 0 : 00 AM SET UP DEMO Clock...
  • Page 61 This unit is equipped with the steering wheel remote control function. Caution: Before operating, connect a JVC's OE remote • Danger of explosion if battery is incorrectly adapter (not supplied) which matches your car replaced. Replace only with the same or to the steering wheel remote input terminal on equivalent type.
  • Page 62: Basic Operations

    Basic operations Ejects the disc Loading slot Display window Selects preset station. Control dial USB (Universal Serial Bus) input terminal Auxiliary input jack Remote sensor • DO NOT expose to bright sunlight. Changing the display information and pattern Ex.: When tuner is selected as the source Source operation display Audio level meter display (<Level Meter>,...
  • Page 63 When you press or hold the following button(s)... Remote Main unit General operation controller Turns on. • When the power is on, pressing /I/ATT on the remote controller also mutes the sound or pauses. Press /I/ATT again to cancel muting or resume playback. Turns off if pressed and held.
  • Page 64: Listening To The Radio

    Listening to the radio Ÿ ] “FM” or “AM” lights up when receiving an FM stereo broadcast with sufficient signal strength. Manual search Automatic presetting (FM)— “M” appears, then SSM (Strong-station Sequential Memory) press the button You can preset up to 18 stations for FM. repeatedly.
  • Page 65 Manual presetting (FM/AM) The following features are available You can preset up to 18 stations for FM and 6 only for FM Radio Data System stations. stations for AM. Searching for your favourite Ex.: Storing FM station of 92.50 MHz into preset FM Radio Data System number “4.”...
  • Page 66 Standby receptions Tracing the same programme— Network-Tracking Reception TA Standby Reception When driving in an area where FM reception is TA Standby Reception allows the unit to switch not sufficient enough, this unit automatically temporarily to Traffic Announcement (TA) from tunes in to another FM Radio Data System any source other than AM.
  • Page 67: Listening To A Disc

    Listening to a disc Ÿ ] Turn on the power. All tracks will be played repeatedly until you change the source or eject the disc. Stopping playback and ejecting Selecting a folder/track on the the disc list “No Disc” appears. While listening to a disc..
  • Page 68 For MP3/WMA disc, you can also use the search Selecting the playback modes menu (A to Z, 0 to 9, and OTHERS) to scroll You can use only one of the following playback through the list menu. modes at a time. •...
  • Page 69: Listening To The Usb Device

    Listening to the USB device This unit is equipped with two USB input terminals (on the control panel and USB cable from the rear of the unit). You can use these two terminals at the same time. • You can also connect a USB Bluetooth Adapter, KS-UBT1 (supplied), ( 15) and/or an Apple iPod/iPhone ( 23) to the USB input terminal(s).
  • Page 70: Using The Bluetooth ® Device

    You can operate the USB device in the same • You cannot connect a computer to the USB way you operate the files on a disc. input terminal of the unit. 11, 12) • Make sure all important data has been backed •...
  • Page 71 Refer also to the instructions supplied with the Bluetooth device. Preparation: • Connect the supplied USB Bluetooth Adapter (KS-UBT1) to one of the USB input terminals of the unit. • Operate the device to turn on its Bluetooth function. ] Turn on the power. Ÿ...
  • Page 72 Hands-Free Audio Display result Call Streaming [Hold] Connect OK ‡ ‡ [Device Name] Handsfree OK ‡ — [Device Name] ] <Bluetooth> ] <New Pairing> Audio Stream OK ‡ — [Device Name] Connect Fail Try — — Reconnect ] Enter a PIN (Personal Identification The device remains registered even after you Number) code in to the unit.
  • Page 73: Using A Bluetooth Mobile Phone

    Connecting/disconnecting a • Received Calls * : Shows the list of registered device the received calls. Go to the following step. • Missed Calls * : Shows the list of the [Hold] missed calls. Go to the following step. • Phonebook * : Shows the name/ phone number of the phonebook registered in the unit or from the...
  • Page 74 Selecting a contact from the phonebook ] Select the name/phone number you want to call. • When the sound is stopped or ] Enter “Call Menu” screen. interrupted during the use of a Bluetooth device, turn off, then turn on the unit. –...
  • Page 75 • Only the existing characters will be shown on Switching the connected mobile phone the search menu. You can switch the current connected mobile • Press and hold 5/∞ to continuously change phone to the last connected mobile phone. the character of the search menu. •...
  • Page 76: Using A Bluetooth Audio Player

    Using a Bluetooth audio player Operations and display indications differ depending on their availability on the connected device. ] Select “BT FRONT” or “BT REAR.” • If playback does not start automatically, operate the Bluetooth audio player to start playback. Selecting the playback modes Starts or resumes •...
  • Page 77: Changing The Bluetooth Settings

    Changing the Bluetooth settings [Hold] ] Select a setting item, then repeat the procedure to change the setting accordingly. ] <Bluetooth> ] <Setting> • To return to the previous menu, press T/P BACK. • To exit from the menu, press DISP or MENU. Setting item Selectable setting, [ Initial: Underlined...
  • Page 78 Reset the unit and try the operation again. If “Please Reset...” appears again, consult your nearest JVC IN-CAR ENTERTAINMENT dealers. Bluetooth Information: If you wish to receive more information about Bluetooth, visit the following JVC web site: <http://www.jvc.co.jp/english/car/> (English website only) ENGLISH...
  • Page 79: Listening To The Ipod/Iphone

    Listening to the iPod/iPhone You can connect the iPod/iPhone using the USB 2.0 cable (accessory of the iPod/iPhone) to the USB input terminal on the control panel or USB cable from the rear of the unit. There are three control terminals: •...
  • Page 80 Caution: Selecting a track from the menu • Some of the applications in the connected The following is not applicable in <iPod Mode> iPod/iPhone may not work correctly with this and <External Mode>. unit. • Avoid using the iPod/iPhone if it might hinder your safety while driving.
  • Page 81 The following is not applicable in <iPod Mode> When operating an iPod, some operations and <External Mode>. may not be performed correctly or as intended. In this case, visit the following JVC web site: <http://www.jvc.co.jp/english/car/> (English website only). ] “Repeat” or “Random”...
  • Page 82: Listening To The Other External Components

    Listening to the other external components You can connect an external component to the AUX (auxiliary) input jack on the control panel. • For details, refer also to the instructions supplied with the external components. Preparation: Make sure <Show> is selected for the <Source Select> = <AUX Source> setting. ] “AUX IN”.
  • Page 83: Selecting A Preset Sound Mode

    Selecting a preset sound mode You can select a preset sound mode suitable Storing your own sound mode for the music genre. You can store your own adjustments in memory. FLAT = NATURAL = DYNAMIC = VOCAL [Hold] = BASS = USER = (back to the beginning) While listening, you can adjust the tone level of the selected sound mode.
  • Page 84: Menu Operations

    Menu operations Repeat step 2 if necessary. • To return to the previous menu, [Hold] press T/P BACK. • To exit from the menu, press DISP or MENU. Category Menu item Selectable setting, [ Initial: Underlined DEMO • On : Display demonstration will be activated Display demonstration automatically if no operation is done for about 20 seconds.
  • Page 85 Category Menu item Selectable setting, [ Initial: Underlined Ring Color * • On : When a call comes in, the display will flash in blue. • The display will change to the original color when the call is answered or the incoming call stops. When the unit receives a SMS, the display only illuminate in blue.
  • Page 86 Category Menu item Selectable setting, [ Initial: Underlined Beep • On : Activates the keypress tone. Keytouch tone • Off : Deactivates the keypress tone. Amplifier • High Power : Vol 00 – Vol 50 Gain * • Low Power : Vol 00 –...
  • Page 87 Category Menu item Selectable setting, [ Initial: Underlined SSM * • SSM 01 – 06 : For settings, Strong-station • SSM 07 – 12 Sequential • SSM 13 – 18 Memory IF Band • Auto : Increases the tuner selectivity to reduce Intermediate interference noises between adjacent stations.
  • Page 88 Category Menu item Selectable setting, [ Initial: Underlined AM Source * • Show : Enable “AM” in source selection. • Hide : Disable “AM” in source selection. AUX Source * • Show : Enable “AUX IN” in source selection. • Hide : Disable “AUX IN”...
  • Page 89: Selecting The Variable Buttons And Display Color Illumination

    Selecting the variable buttons and display color illumination You can select your preferred color for buttons illumination (except for 0 / DISP) and display color seperately. Display zone Button zone All zone Repeat steps 2 and 3 to select a different zone and your preferred color.
  • Page 90 Creating your own day and night colors—User You can create your own colors for <Day Color> and <Night Color> to apply to button zone and display zone. • <Day Color> Displayed when <Dimmer> is set to <Off>. ( • <Night Color> Displayed when <Dimmer>...
  • Page 91: Setting The Time For Dimmer

    Setting the time for dimmer You can set the start/end time for dimmer. [Hold] ] Adjust the dimmer start time. ] <Display> ] <Dimmer> ] <Time Set> ] Adjust the dimmer end time. ] Exit from the setting. More about this unit Basic operations FM Radio Data System operations General...
  • Page 92 Disc/USB operations • Some CD-Rs or CD-RWs may not play back on this unit because of their disc characteristics, Caution for DualDisc playback or for the following reasons: • The Non-DVD side of a “DualDisc” does not – Discs are dirty or scratched. comply with the “Compact Disc Digital Audio”...
  • Page 93 • The maximum number of characters for file/ • When connecting a USB mass storage class folder names is 25 characters (including device, refer also to its instructions. <.mp3>, <.wma>); 128 characters for MP3/ • This unit may not work properly with some WMA Tag.
  • Page 94 • Do not use a USB device with 2 or more Icons for phone types: partitions. These icons indicate These icons indicate • When connecting with a USB cable, use the the phone type of the type of connected USB 2.0 cable. number entries in phone/audio devices •...
  • Page 95 • iPod is a trademark of Apple Inc., registered in the U.S. and other countries. • iPhone is a trademark of Apple Inc. JVC bears no responsibility for any loss of data in an iPod/iPhone and/or USB mass storage class device while using this System.
  • Page 96: Maintenance

    Maintenance Moisture condensation To play new discs Moisture may condense on the lens inside the New discs may have some unit in the following cases: rough spots around the inner • After starting the heater in the car. and outer edges. If such a disc •...
  • Page 97: Troubleshooting

    Troubleshooting Symptom Remedy/Cause Sound cannot be heard from the • Adjust the volume to the optimum level. speakers. • Make sure the unit is not muted/paused ( • Check the cords and connections. The unit does not work at all. Reset the unit.
  • Page 98 Symptom Remedy/Cause Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in a format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. • Add the extension code <.mp3> or <.wma> to the file names.
  • Page 99 Symptom Remedy/Cause Noise is generated. The track played back is not an MP3/WMA/WAV track. Skip to another file. (Do not add the extension code <.mp3>, <.wma>, or <.wav> to non-MP3/WMA/WAV tracks.) “Reading” keeps flashing on the • Readout time varies depending on the USB device. display.
  • Page 100 Symptom Remedy/Cause The unit does not detect the • Search from the Bluetooth device again. Bluetooth device. • Reset the unit ( 3), then search from the Bluetooth device again. The unit does not make pairing Enter the same PIN code for both the unit and target with the Bluetooth device.
  • Page 101 Symptom Remedy/Cause The iPod does not turn on or does not • Check the connecting cable and its work. connection. • Update the firmware version of the iPod/ iPhone. • Charge the battery of the iPod/iPhone. • Reset the iPod/iPhone. •...
  • Page 102: Specifications

    Specifications Maximum Power Output: Front/ 50 W per channel Rear: Continuous Power Output (RMS): Front/ 20 W per channel into 4 Ω, 40 Hz to Rear: 20 000 Hz at no more than 1% total harmonic distortion. Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range: Bass: ±12 dB (50 Hz, 100 Hz, 200 Hz)
  • Page 103 Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz Dynamic Range: 96 dB Signal-to-Noise Ratio: 98 dB Wow and Flutter: Less than measurable limit MP3 Decoding Format: (MPEG1/2 Audio Layer 3) Max.
  • Page 104 The countries where you may use the Bluetooth® function Die Länder, in denen Sie die Bluetooth® Funktion verwenden können Pays où vous pouvez utiliser la fonction Bluetooth® De landen waar u de Bluetooth®-functie mag gebruiken Países en los que se puede utilizar la función Bluetooth® Paesi nei quali è...
  • Page 105 Country Country Country Andorra Ísland Türkiye Italia 台湾 대한민국 United States of America Australia Lichtenstein Venezuela Österreich Lietuva Vietnam Bosna i Hercegovina Vi t Nam Luxemburg Belgien South Africa Luxembourg Belgique ENingizimu Afrika Lëtzebuerg България Suid-Afrika Latvija Canada Monaco Schweiz Crna Gora Suisse Македонија...
  • Page 106 JVC de equipos de audio your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits. consulter votre revendeur d’autoradios JVC.
  • Page 107 / Pour en savoir plus sur connexions, consultez votre revendeur d’autoradio JVC ou une compagnie fournissant des kits. / Si desea información detallada sobre la conexión, consulte con su concesionario de JVC de equipos de audio para automoviles o con una compañía proveedora de kits. Not supplied for this unit.
  • Page 108 PRECAUTIONS on power supply and speaker PRECAUTIONS sur l’alimentation et la PRECAUCIONES sobre las conexiones de la connections connexion des enceintes fuente de alimentación y de los altavoces • DO NOT connect the speaker leads of the power cord to the car •...
  • Page 109 JVC de equipos de audio your JVC IN-CAR ENTERTAINMENT dealer or a company supplying kits. consulter votre revendeur d’autoradios JVC.
  • Page 110 / Pour en savoir plus sur connexions, consultez votre revendeur d’autoradio JVC ou une compagnie fournissant des kits. / Si desea información detallada sobre la conexión, consulte con su concesionario de JVC de equipos de audio para automoviles o con una compañía proveedora de kits. Not supplied for this unit.
  • Page 111 PRECAUTIONS on power supply and speaker PRECAUTIONS sur l’alimentation et la PRECAUCIONES sobre las conexiones de la connections connexion des enceintes fuente de alimentación y de los altavoces • DO NOT connect the speaker leads of the power cord to the car •...
  • Page 112 ENGLISH KW-XR816 CD RECEIVER / For canceling the display demonstration, see page 4. / For installation and connections, refer to the separate manual. / INSTRUCTIONS GET0662-001A [U/UH]...
  • Page 113 Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel.
  • Page 114: How To Read This Manual

    How to read this manual CONTENTS The following icons/symbols are used to How to read this manual indicate: How to reset your unit Press and hold the button(s) How to forcibly eject a disc [Hold] until the desired operation Canceling the display begins.
  • Page 115: Canceling The Display Demonstration

    Canceling the display demonstration Turn on the power. Select <Off>. DEMO SET UP Finish the procedure. DEMO Clock [Hold] PRO EQ (Initial setting) Select <DEMO>. DEMO Setting the clock Turn on the power. Adjust the minute. Set Clock 1 : 00 AM SET UP DEMO Clock...
  • Page 116: Preparing The Remote Controller (Rm-Rk50)

    Preparing the remote controller (RM-RK50) When you use the remote controller for the first Warning (to prevent accidents and time, pull out the insulation sheet. damage): • Do not install any battery other than CR2025 or its equivalent. • Do not leave the remote controller in a place (such as dashboards) exposed to direct sunlight for a long time.
  • Page 117: Basic Operations

    Basic operations Ejects the disc Loading slot Display window Selects preset station. Control dial USB (Universal Serial Bus) input terminal Auxiliary input jack Remote sensor • DO NOT expose to bright sunlight. Changing the display information and pattern Ex.: When tuner is selected as the source Source operation display Audio level meter display •...
  • Page 118 When you press or hold the following button(s)... Remote Main unit General operation controller Turns on. • When the power is on, pressing /I/ATT on the remote controller also mutes the sound or pauses. Press /I/ATT again to cancel muting or resume playback. Turns off if pressed and held.
  • Page 119: Listening To The Radio

    Listening to the radio Ÿ ] “FM” or “AM” lights up when receiving an FM stereo broadcast with sufficient signal strength. Manual search Automatic presetting (FM)— “M” appears, then SSM (Strong-station Sequential Memory) press the button You can preset up to 18 stations for FM. repeatedly.
  • Page 120 Manual presetting (FM/AM) Title assignment You can preset up to 18 stations for FM and 6 You can assign titles up to 30 station stations for AM. frequencies (FM and AM) using 8 characters (maximum) for each title. Ex.: Storing FM station of 92.50 MHz into preset •...
  • Page 121: Listening To A Disc

    Listening to a disc Ÿ ] Turn on the power. All tracks will be played repeatedly until you change the source or eject the disc. Stopping playback and ejecting Selecting a folder/track on the the disc list “No Disc” appears. While listening to a disc..
  • Page 122 Selecting the playback modes For MP3/WMA disc, you can also use the search menu (A to Z, 0 to 9, and OTHERS) to scroll You can use only one of the following playback through the list menu. modes at a time. •...
  • Page 123: Listening To The Usb Device

    Listening to the USB device This unit is equipped with two USB input terminals (on the control panel and USB cable from the rear of the unit). You can use these two terminals at the same time. • You can also connect a USB Bluetooth Adapter, KS-UBT1 (supplied), ( 14) and/or an Apple iPod/iPhone ( 22) to the USB input terminal(s).
  • Page 124: Using The Bluetooth ® Device

    You can operate the USB device in the same • You cannot connect a computer to the USB way you operate the files on a disc. input terminal of the unit. 10, 11) • Make sure all important data has been backed •...
  • Page 125 Refer also to the instructions supplied with the Bluetooth device. Preparation: • Connect the supplied USB Bluetooth Adapter (KS-UBT1) to one of the USB input terminals of the unit. • Operate the device to turn on its Bluetooth function. ] Turn on the power. Ÿ...
  • Page 126 Hands-Free Audio Display result Call Streaming [Hold] Connect OK ‡ ‡ [Device Name] Handsfree OK ‡ — [Device Name] ] <Bluetooth> ] <New Pairing> Audio Stream OK ‡ — [Device Name] Connect Fail Try — — Reconnect ] Enter a PIN (Personal Identification The device remains registered even after you Number) code in to the unit.
  • Page 127: Using A Bluetooth Mobile Phone

    Connecting/disconnecting a • Received Calls * : Shows the list of registered device the received calls. Go to the following step. • Missed Calls * : Shows the list of the [Hold] missed calls. Go to the following step. • Phonebook * : Shows the name/ phone number of the phonebook registered in the unit or from the...
  • Page 128 Selecting a contact from the phonebook ] Select the name/phone number you want to call. • When the sound is stopped or ] Enter “Call Menu” screen. interrupted during the use of a Bluetooth device, turn off, then turn on the unit. –...
  • Page 129 • Only the existing characters will be shown on Switching the connected mobile phone the search menu. You can switch the current connected mobile • Press and hold 5/∞ to continuously change phone to the last connected mobile phone. the character of the search menu. •...
  • Page 130: Using A Bluetooth Audio Player

    Using a Bluetooth audio player Operations and display indications differ depending on their availability on the connected device. ] Select “BT FRONT” or “BT REAR.” • If playback does not start automatically, operate the Bluetooth audio player to start playback. Selecting the playback modes Starts or resumes •...
  • Page 131: Changing The Bluetooth Settings

    Changing the Bluetooth settings [Hold] ] Select a setting item, then repeat the procedure to change the setting accordingly. ] <Bluetooth> ] <Setting> • To return to the previous menu, press BACK. • To exit from the menu, press DISP or MENU. Setting item Selectable setting, [ Initial: Underlined...
  • Page 132 Reset the unit and try the operation again. If “Please Reset...” appears again, consult your nearest JVC car audio dealers. Bluetooth Information: If you wish to receive more information about Bluetooth, visit the following JVC web site: <http://www.jvc.co.jp/english/car/> (English website only) ENGLISH...
  • Page 133: Listening To The Ipod/Iphone

    Listening to the iPod/iPhone You can connect the iPod/iPhone using the USB 2.0 cable (accessory of the iPod/iPhone) to the USB input terminal on the control panel or USB cable from the rear of the unit. There are three control terminals: •...
  • Page 134 Caution: Selecting a track from the menu • Some of the applications in the connected The following is not applicable in <iPod Mode> iPod/iPhone may not work correctly with this and <External Mode>. unit. • Avoid using the iPod/iPhone if it might hinder your safety while driving.
  • Page 135 The following is not applicable in <iPod Mode> When operating an iPod, some operations and <External Mode>. may not be performed correctly or as intended. In this case, visit the following JVC web site: <http://www.jvc.co.jp/english/car/> (English website only). ] “Repeat” or “Random”...
  • Page 136: Listening To The Other External Components

    Listening to the other external components You can connect an external component to the AUX (auxiliary) input jack on the control panel. • For details, refer also to the instructions supplied with the adapter or external components. Preparation: Make sure <Show> is selected for the <Source Select> = <AUX Source> setting. ] “AUX IN”...
  • Page 137: Selecting A Preset Sound Mode

    Selecting a preset sound mode You can select a preset sound mode suitable Storing your own sound mode for the music genre. You can store your own adjustments in memory. FLAT = NATURAL = DYNAMIC = VOCAL [Hold] = BASS = USER = (back to the beginning) While listening, you can adjust the tone level of the selected sound mode.
  • Page 138: Menu Operations

    Menu operations Repeat step 2 if necessary. • To return to the previous menu, [Hold] press BACK. • To exit from the menu, press DISP or MENU. Category Menu item Selectable setting, [ Initial: Underlined DEMO • On : Display demonstration will be activated Display demonstration automatically if no operation is done for about 20 seconds.
  • Page 139 Category Menu item Selectable setting, [ Initial: Underlined : Fad (fader): Press 5 / ∞ to adjust the front and rear Fad/Bal * R6 – F6, [ 0 ] Fader/balance speaker output balance. : Bal (balance): Press 4 / ¢ L6 –...
  • Page 140 Category Menu item Selectable setting, [ Initial: Underlined Dimmer • Auto : Dims the display when you turn on the headlights. * • On : Dims the display and button illumination. • Time Set : Set the timer for dimmer. ( •...
  • Page 141 Category Menu item Selectable setting, [ Initial: Underlined IF Band • Auto : Increases the tuner selectivity to reduce Intermediate interference noises between adjacent stations. frequency band (Stereo effect may be lost.) • Wide : Subject to interference noises from adjacent stations, but sound quality will not be degraded and the stereo effect will remain.
  • Page 142: Selecting The Variable Buttons And Display Color Illumination

    Selecting the variable buttons and display color illumination You can select your preferred color for buttons illumination (except for 0 / DISP) and display color seperately. Display zone Button zone All zone Repeat steps 2 and 3 to select a different zone and your preferred color.
  • Page 143: Creating Your Own Day And Night

    Creating your own day and night colors—User You can create your own colors for <Day Color> and <Night Color> to apply to button zone and display zone. • <Day Color> Displayed when <Dimmer> is set to <Off>. ( • <Night Color> Displayed when <Dimmer>...
  • Page 144: Setting The Time For Dimmer

    Setting the time for dimmer You can set the start/end time for dimmer. [Hold] ] Adjust the dimmer start time. ] <Display> ] <Dimmer> ] <Time Set> ] Adjust the dimmer end time. ] Exit from the setting. More about this unit Basic operations Tuner operations General...
  • Page 145 Disc/USB operations • Some CD-Rs or CD-RWs may not play back on this unit because of their disc characteristics, Caution for DualDisc playback or for the following reasons: • The Non-DVD side of a “DualDisc” does not – Discs are dirty or scratched. comply with the “Compact Disc Digital Audio”...
  • Page 146 • The maximum number of characters for file/ • When connecting a USB mass storage class folder names is 25 characters (including device, refer also to its instructions. <.mp3>, <.wma>); 128 characters for MP3/ • This unit may not work properly with some WMA Tag.
  • Page 147 • Do not use a USB device with 2 or more Icons for phone types: partitions. These icons indicate These icons indicate • When connecting with a USB cable, use the the phone type of the type of connected USB 2.0 cable. number entries in phone/audio devices •...
  • Page 148 Apple <Dimmer> setting. performance standards. • Apple is not responsible for the operation JVC bears no responsibility for any loss of data of this device or its compliance with safety in an iPod/iPhone and/or USB mass storage and regulatory standards.
  • Page 149: Maintenance

    Maintenance Moisture condensation To play new discs Moisture may condense on the lens inside the New discs may have some unit in the following cases: rough spots around the inner • After starting the heater in the car. and outer edges. If such a disc •...
  • Page 150: Troubleshooting

    Troubleshooting Symptom Remedy/Cause Sound cannot be heard from the • Adjust the volume to the optimum level. speakers. • Make sure the unit is not muted/paused ( • Check the cords and connections. The unit does not work at all. Reset the unit.
  • Page 151 Symptom Remedy/Cause Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in a format compliant with ISO 9660 Level 1, Level 2, Romeo, or Joliet. • Add the extension code <.mp3> or <.wma> to the file names.
  • Page 152 Symptom Remedy/Cause Noise is generated. The track played back is not an MP3/WMA/WAV track. Skip to another file. (Do not add the extension code <.mp3>, <.wma>, or <.wav> to non-MP3/WMA/WAV tracks.) “Reading” keeps flashing on the • Readout time varies depending on the USB device. display.
  • Page 153 Symptom Remedy/Cause The unit does not detect the • Search from the Bluetooth device again. Bluetooth device. • Reset the unit ( 3), then search from the Bluetooth device again. The unit does not make pairing Enter the same PIN code for both the unit and target with the Bluetooth device.
  • Page 154 Symptom Remedy/Cause The iPod does not turn on or does not • Check the connecting cable and its work. connection. • Update the firmware version of the iPod/ iPhone. • Charge the battery of the iPod/iPhone. • Reset the iPod/iPhone. •...
  • Page 155: Specifications

    Specifications Maximum Power Output: Front/ 50 W per channel Rear: Continuous Power Output (RMS): Front/ 20 W per channel into 4 Ω, 40 Hz to Rear: 20 000 Hz at no more than 1% total harmonic distortion. Load Impedance: 4 Ω (4 Ω to 8 Ω allowance) Tone Control Range: Bass: ±12 dB (50 Hz, 100 Hz, 200 Hz)
  • Page 156 Type: Compact disc player Signal Detection System: Non-contact optical pickup (semiconductor laser) Number of Channels: 2 channels (stereo) Frequency Response: 5 Hz to 20 000 Hz Dynamic Range: 96 dB Signal-to-Noise Ratio: 98 dB Wow and Flutter: Less than measurable limit MP3 Decoding Format: (MPEG1/2 Audio Layer 3) Max.
  • Page 157 The countries where you may use the Bluetooth® function Die Länder, in denen Sie die Bluetooth® Funktion verwenden können Pays où vous pouvez utiliser la fonction Bluetooth® De landen waar u de Bluetooth®-functie mag gebruiken Países en los que se puede utilizar la función Bluetooth® Paesi nei quali è...
  • Page 158 Country Country Country Andorra Ísland Türkiye Italia 台湾 대한민국 United States of America Australia Lichtenstein Venezuela Österreich Lietuva Vietnam Bosna i Hercegovina Vi t Nam Luxemburg Belgien South Africa Luxembourg Belgique ENingizimu Afrika Lëtzebuerg България Suid-Afrika Latvija Canada Monaco Schweiz Crna Gora Suisse Македонија...
  • Page 159 Having TROUBLE with operation? Please reset your unit Refer to page of How to reset your unit EN, TH © 2010 Victor Company of Japan, Limited 0210DTSMDTJEIN...
  • Page 160 โปรดปรึ ก ษาตั ว แทนจำหน่ า ยเครื ่ อ งเสี ย งติ ด รถยนต์ ของท่ า นหรื อ บริ ษ ั ท ที ่ จ ั ด หาชุ ด อุ ป กรณ์ ใ ห้ regarding installation kits, consult your JVC car audio dealer or a company supplying kits. รายการอุ ป กรณ์...
  • Page 161: Electrical Connections

    เพื ่ อ ใช้ เ ชื ่ อ มต่ อ ระหว่ า งเครื ่ อ งและรถ recommended for connection between the unit and your car. • Consult your JVC car audio dealer or a company supplying kits for details. สอบถามตั ว แทนจำหน่ า ยวิ ท ยุ...

Table of Contents