Receiving/Ending A Phone Call; Using The Remote Controller - JVC KW-XR810 Instructions Manual

• Only the existing characters will be shown on
the search menu.
• Press and hold 5/∞ to continuously change
the character of the search menu.
• If your phonebook contains many contacts,
searching take some time.

Receiving/ending a phone call

When a call comes in, the source is
automatically changed to "BT FRONT/BT REAR."
"Receiving... [Phone number/name]" appears
on the display.
• The display will flash in blue. (<Ring Color>,
32)
When <Auto Answer> is activated....
The unit answers the incoming calls
automatically,
• Press or the control dial to answer
the incoming call when <Auto Answer> is
deactivated.
• Press 5/∞ to adjust the microphone volume
(1 – 3) during a phone call conversation.
To preset the microphone volume,
• Press 4
/¢
Noise Reduction and Echo Cancelation mode.
To preset, 20.
To end a call or reject an incoming call, press
and hold or the control dial.
Switching conversation media (the unit/
mobile phone)
Press the control dial during a phone call
conversation, then continue your conversation
using the other media.
• Operations may be different according to the
connected Bluetooth device.
18 ENGLISH
20.
20.
to turn on/off the
Switching the connected mobile phone
You can switch the current connected mobile
phone to the last connected mobile phone.
[Hold]
Phone icon appears and "Connecting" flashes
on the display. When the last connected
phone is being reconnected again, "Connected
[Device Name]" appears on the display. Now
you can use the last connected mobile phone
with the unit.
Arriving of a text message
When a text message comes in, the unit rings
if your mobile phone is compatible with text
message and <Message Notice> is set to
<On>. ( 20)
• "Received Message" appears on the
display and the display illuminate in blue.
(<Ring Color>, 32)
• You cannot read, edit, or send a message
through the unit.

Using the remote controller

5 U / D ∞ / 2 R / F 3 /
SOURCE
5 U / D ∞ / 2 R / F 3 /
SOURCE
[Hold]
: Switches the conversation media
(between the unit and mobile
phone) during a phone call
conversation
: Answers calls
: Rejects calls