The Search Method - One for All URC-7562 User Manual

--> If your device does not respond to the ONE FOR ALL 6 after you
have tried all the codes listed for your brand.
--> If your brand is not listed at all.
The Search Method allows you to scan through all the codes contained
in the memory of the ONE FOR ALL 6.
Example: To search for your TV code:
1
2
3
4
5.
6.
7.
Important notes:
Most TV's do not switch on pressing the POWER key. Please try
-
pressing a "number" key or the "TV-text off" key to switch your
TV back on.
- If you cannot control your Television properly, please continue the
Search Method, you may be using the wrong Code.
- To search for the code for another device follow the instructions above
only press the appropriate device key instead of TV during step 2.
- If the original remote control of your Video recorder or DVD player
does not have a POWER key, press PLAY instead of POWER during
step 5.
WWW.ONEFORALL.COM

The Search Method

Switch your television on (not on standby) and aim your
ONE FOR ALL at your TV.
Press the TV key on your ONE FOR ALL 6.
Press and hold down MAGIC until the ONE FOR ALL 6's
TV key blinks twice (the TV key will blink once and then
twice).
Press 9 9 1. The TV key will blink twice.
Next, press POWER.
Aim the ONE FOR ALL 6 at your Television. Now press CH+
over and over, until your Television turns off (every time
you press the CH+ key the ONE FOR ALL 6 will send out a
POWER signal from the next code contained in the
memory). You may have to press this key many
times (up to 150 times) so please be patient.
If you skip past a code, you can go to the previous code(s)
by pressing the CH- key. Remember to keep pointing the
ONE FOR ALL 6 at your Television while pressing this key.
As soon as your television turns off, press MAGIC to store
the code.
7