Table of Contents | en Table of Contents Safety Safety precautions Important safety instructions Important notices FCC & ICES compliance UL certification Bosch notices Introduction Features Unpacking Connections Power connection 3.1.1 Low voltage cameras 3.1.2 High voltage cameras Video connection 3.2.1...
Page 4
en | Table of Contents Install menu structure 4.3.1 Lens Wizard submenu 4.3.2 Alarm submenu 4.3.3 Defaults submenu Technical Data Specifications...
If not avoided, this could result in minor or moderate bodily injury. CAUTION! Low risk: Indicates a potentially hazardous situation. If not avoided, this could result in property damage or risk of damage to the unit. Bosch Security Systems Installation and Operation manual AM18-Q0602 | v1.0 | 2011.04...
10. Attachments, changes or modifications - Only use attachments/accessories specified by the manufacturer. Any change or modification of the equipment, not expressly approved by Bosch, could void the warranty or, in the case of an authorization agreement, authority to operate the equipment.
Day/Night Camera Safety | en Important notices Disposal - Your Bosch product was developed and manufactured with high-quality material and components that can be recycled and reused. This symbol means that electronic and electrical appliances, which have reached the end of their working life, must be collected and disposed of separately from household waste material.
Federal Communications Commission, helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000-00345-4. AM18-Q0602 | v1.0 | 2011.04 Installation and Operation manual Bosch Security Systems...
UL MAKES NO REPRESENTATIONS, WARRANTIES, OR CERTIFICATIONS WHATSOEVER REGARDING THE PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING-RELATED FUNCTIONS OF THIS PRODUCT. Bosch Security Systems Installation and Operation manual AM18-Q0602 | v1.0 | 2011.04...
| Safety Day/Night Camera Bosch notices Copyright This manual is the intellectual property of Bosch Security Systems and is protected by copyright. All rights reserved. Trademarks All hardware and software product names used in this document are likely to be registered trademarks and must be treated accordingly.
Day/Night Camera Introduction | en Introduction Features The VBC-265 is a professional surveillance day/night camera that incorporates 10-bit digital signal processing. The camera is easy to install and ready to use, and offers good quality picture performance. Features include: –...
Use AWG16 to 22 stranded wire or AWG16 to 26 solid wire; cut back 10 mm (0.4 in) of insulation. – Push in the tabs and insert the wires. Note These connections are not polarity sensitive. AM18-Q0602 | v1.0 | 2011.04 Installation and Operation manual Bosch Security Systems...
A L A R M Figure 3.3 BNC connectors 3.2.1 Output Video signal The camera has a BNC connector to connect the video coax cable with a male BNC connector. Bosch Security Systems Installation and Operation manual AM18-Q0602 | v1.0 | 2011.04...
22 kOhm pull-up to +3.3 V. – Alarm in: configurable as active low or active high. – Max. 42 V allowed between camera ground and each of the relay pins. AM18-Q0602 | v1.0 | 2011.04 Installation and Operation manual Bosch Security Systems...
(OSD) failure message LENS SHORT CIRCUIT is shown. The lens circuit is automatically disabled to avoid internal damage. Remove the lens connector and check the pin connections. Bosch Security Systems Installation and Operation manual AM18-Q0602 | v1.0 | 2011.04...
Press and hold the center key for more than 1 second until the Install menu appears. Select Wizard and move cursor to the Set Back Focus Now item. Turn the back focus adjustment as required. AM18-Q0602 | v1.0 | 2011.04 Installation and Operation manual Bosch Security Systems...
Page 17
Press and hold the center key for more than 1 second until all the menus disappear. Close the side door panel. Note: To back focus a zoom lens, see the zoom lens installation guide. Bosch Security Systems Installation and Operation manual AM18-Q0602 | v1.0 | 2011.04...
There are different methods of controlling the IR filter: – via an alarm input, or – automatically, based on the observed light levels. AM18-Q0602 | v1.0 | 2011.04 Installation and Operation manual Bosch Security Systems...
4.1.2 Menu navigation Five keys, located behind the side door panel, are used for navigating through menu system. Figure 4.1 Side panel door Figure 4.2 Menu/select key Bosch Security Systems Installation and Operation manual AM18-Q0602 | v1.0 | 2011.04...
Page 20
To close all menus at once hold down the menu/select key until the menu display disappears or continually select the Exit item. Some menus automatically close after about two minutes; other menus have to be closed manually. AM18-Q0602 | v1.0 | 2011.04 Installation and Operation manual Bosch Security Systems...
Line lock - to lock to the AC power supply V-Phase 0 to 358° Adjusts the vertical phase (only available if sync = line lock). Exit Exit the menu Bosch Security Systems Installation and Operation manual AM18-Q0602 | v1.0 | 2011.04...
On, Off Autoblack On automatically increases the visibility of details even when scene contrast is less than full-range due to mist, fog, etc. EXIT Returns to main menu. AM18-Q0602 | v1.0 | 2011.04 Installation and Operation manual Bosch Security Systems...
A high (positive) value means that the camera switches to monochrome at a higher light level. EXIT Returns to main menu. Bosch Security Systems Installation and Operation manual AM18-Q0602 | v1.0 | 2011.04...
Select to enter the area set-up menu to define the detection area. Motion Indicates the peak of measured motion indicator in the selected area. Press either the right, left or center navigation button to reset. AM18-Q0602 | v1.0 | 2011.04 Installation and Operation manual Bosch Security Systems...
Page 25
Because of this, it is recommended to not connect the VMD- triggered alarm output of the camera to a monitored alarm system, as the false-positive alarms may be considered a nuisance. Bosch Security Systems Installation and Operation manual AM18-Q0602 | v1.0 | 2011.04...
Select to fully open the iris. Follow the instructions below for setting the backfocus for your particular lens type. After focusing the object of interest remains in focus under bright and low light conditions. AM18-Q0602 | v1.0 | 2011.04 Installation and Operation manual Bosch Security Systems...
Page 27
Point the camera at the scene it will be mostly viewing. Adjust the level potentiometer located on the lens until the Level bar is in the central position. Exit the menu. Bosch Security Systems Installation and Operation manual AM18-Q0602 | v1.0 | 2011.04...
Restores all settings to their default (factory) values. Select YES, then press the Menu/Select button to restore all values. When completed the message RESTORED! is shown. EXIT Returns to Install menu. Bosch Security Systems Installation and Operation manual AM18-Q0602 | v1.0 | 2011.04...
Lens mount CS compatible, C-mount compatible with adapter ring ALC lens Video or DC iris auto detect Video Motion One area, fully programmable remotely Detection (VMD) Power consumption AM18-Q0602 | v1.0 | 2011.04 Installation and Operation manual Bosch Security Systems...
Page 31
Tripod mount Two 1/4" 20 UNC - isolated (bottom) and non-isolated (top) Operating -20 °C to +50 °C (-4 °F to +122 °F) temperature Controls OSD with softkey operation Bosch Security Systems Installation and Operation manual AM18-Q0602 | v1.0 | 2011.04...