Pioneer DEH-P6800MP Operation Manual page 60

Section
II
(Initial Settings
)
c )
Adjusting initial settings
Using the initial settings, you can customize
various system settings to achieve optimal per-
formance from this unit.
CD
Function display
Shows the function status.
1 Press SOURCE and hold until the unit
turns off.
2
Press MULTI-CONTROL and hold until
Language select appears in the display.
3
Turn MULTI-CONTROL to select one of
the initial settings.
Turn MULTI-CONTROL clockwise to switch be-
tween the functions in the following order:
Language select (language selection)-Clock
(clock)-Warning tone (warning tone)
-Face auto open (face auto open)-AUX1
(auxiliary input 1)-AUX2 (auxiliary input 2)
-Dimmer (dimmer)-Brightness (bright-
ness)-Sub/W control (rear output and sub-
woofer controller)-Mute (sound muting/
attenuation)-Demonstration (feature demo)
-Reverse mode (reverse mode)-Ever-scroll
(ever scroll)
Use the followi ng instructions to operate each
particular setting.
• You can also switch between the functions in
reverse order by turning MULTI-CONTROL coun-
terclockwise.
• To cancel initial settings, press BAND, [!J
@
En
Selecting the display language
For your convenience, this unit equips multi-
ple language display. You can select the lan-
guage best suited to your first language.
1
Use MULTI-CONTROL to select
Language, select.
Language select appears in the display.
2 Press MULTI-CONTROL to select the lan-
guage.
Each press of MULTI-CONTROL selects lan-
guages in the following order:
English-Fran~ais-Espanol
[!J
Setting the clock
Use these instructions to set the clock.
1
Use MULTI-CONTROL to select Clock.
Clock appears in the display.
2 Push MULTI-CONTROL left or right to
select the segment of the clock display you
wish to set.
Pushing MULTI-CONTROL left or right will se-
lect one segment of the clock display:
Hour-Minute
As you select segments of the clock display
the segment selected will blink.