Pioneer DEH-P6800MP Operation Manual page 56

Section
m(
Audio Adjustments
)
(-----~)
Using the equalizer
The equalizer lets you adjust the equalization
to match car interior acoustic characteristics
as desired.
Recalling equalizer curves
There are seven stored equalizer cUI-ves which
you can easily recall at any time. Here is a list
of the equalizer curves:
Display Equalizer curve
" t _
Powerful Powerful
Natural Natural
Vocal
Vocal
Custom1 Custom 1
Custom2 Custom 2
Flat
Flat
Super Bass Super bass
• Custom1 and Custom2 are adjusted equal-
izer curves that you create. Adjustments
can be made with a 7-band graphic equali-
zer.
• When
Flat is selected no supplement or
correction is made to the sound. This is
useful to check the effect of the equalizer
curves by switching alternatively between
Flat and a set equalizer curve.
• Press
EQ
to select the equalizer.
Press
EQ
repeatedly to switch between the fol-
lowing equalizers:
Powerful-Natural-Vocal-Custom1-
Custom2-Flat-Super Bass
Adjusting equalizer curves
The factory supplied equalizer curves, with the
exception of
Flat, can be adjusted to a fine de-
gree (nuance control).
CID
En
1 Use MULTI-CONTROL to select the gra-
phic equalizer adjustment.
Powerful appears in the display.
If the equalizer curve has been previously se-
lected, the curve of that previously selected
will be displayed instead of Powerful.
2 Push MULTI-CONTROL left or right to
select an equalizer curve.
Each pushing MULTI-CONTROL left or right
selects equalizer curves in the following order:
Powerful-Natural-Vocal-Custom1-
Custom2-Flat-Super Bass
3 Push MULTI-CONTROL up or down to
adjust the equalizer curve.
Each pushing
MULTI-CONTROL up or down
increases or decreases the equalizer curve re-
spectively.
+6 - -5 (or -6) is displayed as the equalizer
curve is increased or decreased.
• The actual range of the adjustments are differ-
ent depending on which equalizer curve is se-
lected.
• The equalizer curve with all frequencies set to
o
cannot be adjusted,
Adjusting 7-band graphic equalizer
For
Custom1 and Custom2 equalizer curves,
you can adjust the level of each band.
• A separate Custom1 curve can be created
for each source. (The built-in CD player and
the multi-CD player are set to the same
equalizer adjustment setting automati-
cally.) If you make adjustments when a
curve other than
Custom2 is selected, the
equalizer curve settings will be memorized
in
Custom1.
• A
Custom2 curve can be created common
to all sources. If you make adjustments
when the
Custom2 curve is selected, the
Custom2 curve will be updated.