Password Setting For The Child Lock (For A-Tv/D-Tv Input Mode) - Sharp LC-40LX710H Operation Manual

Watching TV
Password setting for the child lock
(for A-TV/D-TV input mode)
Allows you to use a password to protect certain
settings from being accidentally changed.
Setting a password
Register a 4-digit password number to use the Child
Lock function.
Press MENU and the MENU screen displays.
1
Press c/d to select "Setup".
2
Press b/c/d to select "View setting".
3
Press a / b to select "Individual setting" and
4
then press ENTER.
Press a / b to select "Password", and then
5
press ENTER.
If you already set the password, enter it here.
6
Press c/d to select "Yes", and then press
7
ENTER.
Setting Password. You can change or
Enter your new password. Use 4 digits
Enter the password again to confirm
Enter the 4-digit number as a password using
8
0 - 9.
Setting Password. You can change or
Enter your new password. Use 4 digits
Enter the password again to confirm
28
40LX710H_en.indd 28 40LX710H_en.indd 28
Password
clear Password
Yes No
Password
clear Password
Yes No
Enter the 4-digit number as in step 8 to
9
confi rm.
Press ENTER to complete.
10
Password
Press
:Enter
NOTE
• To view a locked channel (Lock setting in Programme setup
"Manual adjust" is set to "On"), you must enter a password.
(See page 23.) When you select a locked channel, a
password prompt message pops up. Press RETURN to
display the password input window.
Deleting the password
Allows you to clear your password.
Repeat steps 1 to 5 in Setting a password.
1
Enter the password.
2
Press c / d to select "No", and then press
3
ENTER.
Press c / d to select "Yes", and then press
4
ENTER to delete the password.
Password
Delete password?
Yes
NOTE
• As a precautionary measure, make a note of your
password on the back of this operation manual, cut
it out and keep it in a safe place that children cannot
reach. (See page 71.)
• This function is only available for TV input mode.
• To relock a channel which has been temporarily unlocked
by inputting the correct password, turn power off and then
on again.
to complete
OK
No
2010/04/15 16:11:51 2010/04/15 16:11:51